Sony VPL-HW15 Operating Instructions Manual page 51

Power Saving
Sets the power saving mode.
When set to "On", the projector goes into power saving mode if no
signal is input for
to
minutes. At that time, the ON/STANDBY
indicator lights in orange, then the screen becomes dark. In power
saving mode, the power saving mode is cancelled if a signal is input
or any button on the projector or the remote control is pressed. If you
do not want to set the projector to power saving mode, select "Off'.
Input-A Signal Sel.
Selects the type of signal input from the equipment connected to
the INPUT A connector.
Selects the type of signal input from the equipment by selecting
"Input-A" with the INPUT button.
Auto: Selects the input signal type automatically.
Computer: Inputs the signal from a computer.
Video GBR: Inputs the signal from a TV game or HDTV broadcast.
Component: Inputs the component signal from a DVD player/
recorder, Blu-ray Disc player/recorder, digital tuner, etc.
ED
When the input signal is not displayed correctly with this item set to
"Auto," select the item according to the input signal.
Color System
Selects the color system of the input signal.
Auto: Selects the color system of the input signal automatically
from among NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M,
PAL-N, or PAL60.
"NTSC3.58"-"PAL-N": Allows you to set the color system to the
selected system manually.
ED
Normally, set this to "Auto." If the picture is distorted or colorless,
select the color system appropriate for the input signal.
Lamp Setting
When replacing the lamps, set the desired lamp setting.
(@'
page 67)
51
c
~.
:::J
<0
-
' :j'
(I)
~
(I)
:::J
C
CJ)