Sony VPL-HW15 Operating Instructions Manual page 18

ON/STANDBY
.....\1"
-0-
/,
\ '
Flashes in green for
a while (tens of
seconds) and then
lights in green.
2
Press the
1/6
(ON/STANDBV)
switch to turn on the projector.
The ON/ST ANDBY indicator flashes
in green, and then lights in green.
When the ON/STANDBY indicator
flashes, "Starting..." appears on the
screen.
3
Display a test signal for
performing adjustments.
Press the LENS button on the remote
control to display the test signal.
Tip
The test signal is displayed for I minute.
Press the
ffi
button to clear the test signal
display before that.
4
Move both lens shift dials to
adjust the picture position.
ON/STANDBY
LAMP/COVER
o
18
To adjust the vertical
position
To adjust the horizontal position