Setup Menu - Sony VPL-HW15 Operating Instructions Manual

Setup Menu
The Setup menu is used to change the factory preset settings, etc.
Status
Sets whether or not the on-screen display is displayed.
Set to "Off' to tum off the on-screen displays except for certain
menus, message when turning off the power, and warning messages.
Language
Selects the language used in the menu and on-screen displays.
Available languages are: English, Dutch, French, Italian, German,
Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese,
Chinese (Simplified Chinese), Chinese (Traditional Chinese),
Korean, Thai and Arabic.
Menu Position
You can change the position to display the menu on the upper
screen.
Bottom Left: Displays the menu on the bottom left area of the
screen.
Center: Displays the menu on the center of the screen.
Cooling Setting
Use this item when using the projector at high altitudes.
High: Use this setting when using the projector at an altitude of
1,500 m or higher.
Standard: Use this setting when using the projector at normal
altitudes.
mnD
• The factory default setting is "Low".
• When this item is set to "High", the fan noise becomes slightly
louder since the number of fan rotations increase.
Standby Mode
Lowers the power consumption in standby.
When set to "Standard", the power consumption in standby becomes
normal.
When set to "Low", the power consumption in standby is lowered.
ED
When this item is set to "Low", the "PJ Auto Power On" function is
disabled (The function is set to "Off' and does not appear in the
menu.).(Gf' page 52)
50