Table of Contents
Advertisement
ENGLISH
Pedal Tension Adjustment
LOOK pedals are ALWAYS delivered pre-set to a minimum
tension. Adjustment is carried out at the rear of the pedal,
on the lever, using a 3 mm Allen key. By turning the key
in the + direction (clockwise), you increase the amount of
stress necessary for cleat release. Allow tension to remain
minimal until you have become perfectly familiar with the
system. Adjustment can not be carried out when the cleat
is engaged in the pedal. You will hear a ''click'' when the
maximum adjustment is reached. Once this click is heard,
stop screwing as it may damage the pedal.
Engagement / Release
Engagement: Insert the cleat in the pedal in accordance
with trajectory 1 and press down on the pedal as per
trajectory 2 to lock the cleat.
Release: Rotate your heel towards the outside (picture 3)
and it will disengage.
Do not release towards the inside, as this may cause the
heel to touch the spokes and cause a crash.
18
Important Information
Technical Specifications
Polar P5 power transmitter
-10 °C to +50 °C
Operating temperature:
Storage temperature:
-20 °C to +60 °C
Battery type:
CR2354
Battery life:
Average 5 months (2h/day, 7days/week)
Water resistance:
IPX7 (Splash proof)
LOOK Kéo Power pedals
-10 °C to +50 °C
Operating temperature:
Storage temperature:
-20 °C to +60 °C
Distance crank/middle of
55 mm
the pedal
Pedal float:
0, 4.5, or 9 degrees
Water resistance:
IPX7 (Splash proof)
Measurement ranges
Average power:
0 - 2000 W
L/R balance:
0 - 100 %
Cadence:
30 - 199 rpm
Maximum load:
1800 N
Advertisement
Table of Contents
