Using Headphones; Dolby Digital (For Dvd); Basic Operation; Turning The Unit On For The First Time - Venturer 17” LCD TELEVISION Owner's Manual

CONNECTIONS

USING HEADPHONES

• Turn down the volume before connecting
headphones to the unit, then adjust the volume
to your desired level.
• When headphones are connected, no sound will
come from the front speakers.
Note:
• Avoid listening to sound at high levels for
prolonged periods of time. This may be harmful
to you and may cause hearing loss.

DOLBY DIGITAL (fOR DVD)

Dolby Digital is a sound system developed by Dolby Laboratories Inc. This unit automatically recognizes DVDs that
have been recorded with Dolby Digital.
Not all Dolby Digital sources are recorded with 6 channels.
Some sources marked Dolby Digital may be recorded in Dolby Surround, a 2 channel system. Look for this logo
on your unit.
Manufactured under license from Dolby Laboratories.
'Dolby' and the double-D symbol are trademarks of Dolby Laboratories.

BASIC OPERATION

TURNING THE UNIT ON fOR THE fIRST TIME

The first time you turn the unit on, it will go straight into Auto scan mode. Simply follow the screen prompts as below
to tune in the channels.
1. Use the / button to select the screen menu language you prefer.
2. Use the button to move to Auto Tuning, press the ENTER/OK button to enter Auto Tuning menu.
3. Use the / button to select the Country you are in.
4. Use the button to move to Start. Press the ENTER/OK button confirm Start. The system will automatically start
to scan and preset all available programmes.
5. After scanning has finished, the TV will display the first programmes stored of DTV program.
TURNING THE UNIT ON
When the AC power cord is connected, the standby indicator lights on. Press the
standby indicator will blink for about 10 seconds for loading, and will finally light off until the above screens shown.
Press the FUNCTION button to select the desired mode (DTV, TV, AV1, AV2/SCART, YUV/SCART, DVD or HDMI).
If you select DVD mode, the DVD logo will appear on the screen.
Note:
When the unit is not going to be used for a long time, disconnect the AC power supply cord from AC outlet.
Earphones / Headphones
(1/8" [3.5mm] diameter plug)
- 14 -
/ I button to turn the unit on, the