Removing And Tightening The Jets - Coleman Roto Spa Owner's Manual

26

Removing and Tightening the Jets

Part of your periodic maintenance includes retightening the jets. This needs to be done at least every six
months. Although the roto mold shell is durable, the polyethelene material can bend and warp over time. This
may allow some water to leak around the jet fittings. Regularly tightening the jet bodies can prevent this.
DO NOT loosen or remove jets bodies! Loosening them may cause them to separate from the
recepticle inside the spa cabinet and cause a significant leak.
Adjustable Jets
Adjustable jets should be removed periodically in order to retighten the jet bodies.
1. Insert a flat screw-
driver between the jet
face and the spa shell.
Gently pry up the jet
and remove it.
2. Place the adjusting
tool on the face of the
jet body and insert a
screwdriver
the center for torque.
Twist the tool clock-
wise to tighten. NEV-
ER LOOSEN THE JET
BODY.
Fixed Jets
1. Insert the metal hex
wrench end into the
jet face.
2. Twist the tool clock-
wise to tighten the
jet. NEVER LOOSEN
THE JET BODY.
through
Coleman Roto Mold Spa (online sales)
LTR50001136, Rev. A