AMX Mio Modero R-3 Operation/Reference Manual page 28

Programming The Mio R-3
Send_Commands (Cont.)
SLEEP
Set the Sleep timer or put the
remote to sleep immediately.
@SSL
Sends a string to the master
upon going to sleep
@SST
Sends a string to the master
upon start up
@SWK
Sends a string to the master
upon wakeup
24
This command can be used if a sleep time other than 3, 6, 9, or 12 seconds is
desired.
Syntax:
SLEEP
Forces keypad to turn backlight off.
SLEEP-#
Sets sleep time.
Variables:
• # = 0 - 60 in seconds; time to wait before going to sleep.
Example:
SLEEP-45
Sets the sleep timer to 45 seconds. After 45 seconds of inactivity, the remote
will go to sleep.
SEND_COMMAND panel,"'SLEEP'"
Force the keypad to go to sleep.
Syntax:
"'@SSL-<new text>'"
Variables:
• new text = 1 - 20 ASCII characters. Default string is SLEEP.
Example:
SEND_COMMAND Panel,"'@SSL-KeyPad Sleep'"
Sends the string " KeyPad Sleep'" to the master at time of sleep.
Syntax:
"'@SST-<new text>'"
Variables:
• new text = 1 - 20 ASCII characters. Default string is STARTUP.
Example:
SEND_COMMAND Panel,"'@SST-Panel Start'"
Sends the string " Panel Start " to the master at time of start up.
Syntax:
"'@SWK-<new text>'"
Variables:
• new text = 1 - 20 ASCII characters. Default string is WAKEUP.
Example:
SEND_COMMAND Panel,"'@SWK-Wake KeyPad"
Sends the string " Wake KeyPad " to the master at time of wake up.
Mio Modero R-3 Remote