AMX Mio Modero R-3 Operation/Reference Manual page 24

Programming The Mio R-3
Serial Commands (Cont.)
ZAP!
Erase Configuration
Information in Flash Memory
ZIGC
Sets the ZigBee Channel
ZIGP
Sets the ZigBee PAN ID
20
Syntax:
ZAP! t
Variables:
• t = MENU or FONT or blank
Example:
ZAP!
Clears all configuration information and erases the font. The text displayed on
the LCD for the six devices returns to default and all parameters that can be set
in Setup Mode are reset to their default value.
ZAP! MENU
Sets the text displayed on the LCD for the six devices to the default values.
ZAP! FONT
Erases the font from the flash.
NOTE: These commands are intended for serial use only. These commands
cannot be issued when the device's Setup Page is open.
Syntax:
ZIGC <channel> (Decimal)
Example:
ZIGC 26
Syntax:
ZIGP <panId> (Decimal)
Example:
ZIGP 123A
Mio Modero R-3 Remote