Connecting The Assembly Cable - Samsung AM18B1C09 Owner's Instructions & Installation Manual

Connecting the Assembly Cable

The outdoor unit is powered from the indoor unit via the assembly cable.
If the outdoor unit is more than 5m(16ft. 5in) away from the indoor unit, the
cable must first be extended to a maximum of 15m(49ft. 3in).
1 Extend the assembly cable if necessary.
2 Open the front grille by pulling on the tabs on the lower right and left sides of
the indoor unit; if necessary, refer to page 21.
3 Remove the screw securing the connector cover, then open the connector
cover.
4 Remove three screws securing the front panel, then detach the front panel
from the indoor unit.
I I
NSTALLING THE NDOOR
The designs and shape are subject to
change according to the model.
Connector
cover
U
NIT
35
E-