Miele S 7000 Series Operating Instructions Manual page 33

The suction hose can be opened up to
clean out any heavy soiling or
blockages. Any large particles inside it
can then be easily removed.
^ Raise the vacuum cleaner into the
vertical position.
^ Press the release button on the
telescopic tube and remove the
suction tube handle.
^ To increase stability, turn the elbow
joint at the bottom of the hose
downwards as illustrated until it clicks
into position above the retainer.
A Unlock the hose socket by turning it
in the direction of the arrow.
B Now remove the hose socket from
the elbow by pulling it.
^ Remove any soiling or blockages.
^ To replace the socket, line the
notches up (see illustrations) and
push firmly onto the elbow making
sure it goes on straight. You may
need to twist it slightly. It will click
when it is correctly connected.
If you have not been able to reach all of
the soiling, you could also try the following.
Unlock the panel on the base of the
vacuum cleaner, as follows.
A Using a suitable flat bladed
screwdriver or a one pence coin,
loosen the two screws anti-clockwise
until you feel a click.
B Lever off the panel (you will need to
use a little force).
^ Remove any debris or blockages.
^ Replace the panel (making sure the
bottom spacer is fitted correctly) and
lock it with the screws.
Maintenance
33