5.3 DISASSEMBLY DIRECTIONS
5.3.1 NOTES ON DISASSEMBLY
(1)
Clean the disassembly location.
(2)
Before disassembly, disconnect the power cable and remove the AC plug from the outlet.
(3)
Follow the disassembly procedures. Never loosen the screws of parts that must not be
disassembled.
(4)
Store the disassembled parts in a clean pl3100MFP to avoid loss.
(5)
After repl3100MFPment, check the contacts and spare part mounting.
(6)
Assemble the parts in reverse order of the disassembly procedure.
5.3.2 DOCUMENT COVER REMOVAL
(1)
Gently unplug the ADF cable from the ADF port.
(2)
Lift the document cover with the ADF to remove the studs from the hinge holes. The studs are
loosely attached to the hinge holes for covering your original document.
(1)
ADF port
ADF cable
Picture 5.2 Document cover removal
5-4
(2)
Document
Cover
Stud
Hinge hole