Quadra-Fire QFI30-C Owner's Manual page 35

G. Install the Log Assembly
Log Set Assembly: LOGS-QFI35
Models: QFI35, QFI35-C
CAUTION: Logs are fragile, handle with care.
Figure 1. Refractory and Logs Installed
Install back refractory by placing it against the back of the fi rebox. The back refractory must be held in the upright position
until the side refractory is installed. Install the left side refractory as shown in Figure 3. Bend the refractory tab down as
shown in Figure 4. Repeat this step for the right refractory panel.
Figure 3. Install Side Refractory
Quadra-Fire • QFI30-C, QFI35-C • 2227-901 Rev. H • 7/12
SRV2225-703 SRV2225-703
SRV2225-704 SRV2225-704
SRV2225-705 SRV2225-705
Figure 2. Install Back Refractory
Figure 4. Bend Refractory Tab
SRV2225-701 SRV2225-701
SRV2225-702 SRV2225-702
SRV2225-706 SRV2225-706 SRV2225-710 SRV2225-710
REFRACTORY REFRACTORY
TAB TAB
35