Panasonic Viera TH-P42UT30D Operating Instructions Manual page 79

Stereo / Bilingual Sound Selection
When you receive the stereo / bilingual sound system, sound output modes can be selected by using
the [MPX] in the Sound Menu.
Audio Signal STEREO
Mode Indicator
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
Type of Regular broadcast
broadcast (Standard Audio)
Mode Indicator No Indicator
A2 (German) .......Used in Australia, Malaysia etc.
Type of Regular broadcast
(Standard Audio)
broadcast
Mode Indicator No Indicator
•
If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic
switching occurs, it is recommended you switch from STEREO to MONO.
•
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
•
When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO
position, using the Sound Selection button.
•
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.
MAIN I
Regular + NICAM MONO I
(MAIN I )
BILINGUAL or DUAL MONO:
MAIN I / SUB II
SUB II MONO
NICAM NICAM DUAL MONO
STEREO (MAIN I / SUB II )
I
STEREO
II
79