Panasonic Viera TH-P42UT30D Operating Instructions Manual page 35

3D-COMB
• Off
• On
3D Settings
Screen Display
• Off
• On
R-Gain
G-Gain
B-Gain
R-Cutoff
G-Cutoff
B-Cutoff
Reset to Defaults
Gamma
• S Curve /
1.8 / 2.0 /
2.2 / 2.4 / 2.6
Reset to Defaults
Intelligent Frame
Creation
• Off
• Mid
• Max
24p Smooth Film
• Off
• Mid
• Max
Film Cadence
Detection
• Off
• On
Makes still or slow moving pictures look more vivid
•
Occasionally, while viewing still or slow moving pictures, colour patterning
may be seen. Set to [On] to display sharper and more accurate colours.
•
For PAL or NTSC signal reception only
•
Not valid on Component, PC, HDMI and Media Player
Adjusts and sets to view 3D images (p. 31)
Turns the screen off when you select [Off]
•
The sound is active even if the screen turns off.
•
Press any buttons (except Standby) to turn the screen on.
•
This function is effective in reducing power consumption when listening
to the sound without watching the TV screen.
Adjusts the white balance of bright red area
Adjusts the white balance of bright green area
Adjusts the white balance of bright blue area
Adjusts the white balance of dark red area
Adjusts the white balance of dark green area
Adjusts the white balance of dark blue area
Press the OK button to reset to the default White Balance
Switches the gamma curve
•
Please note the numerical values are reference for the adjustment.
Press the OK button to reset to the default Gamma
Automatically compensates the picture frame rate and removes juddering
movements to make the images smooth and clear
•
Depending on the contents, images may be noisy. To prevent the noise,
change the setting.
•
This function is not available for selection (default to [Off]) when
[Viewing Mode] is set to [Game] or in the mode of PC input or Network
service operations.
Automatically compensates the picture frame rate to make the 24p
source movie images smooth
•
This is available only for 24p signal input and displayed instead of
[Intelligent Frame Creation].
•
This function is not available for selection (default to [Off]) when
[Viewing Mode] is set to [Game] or in the mode of PC input or Network
service operations.
Automatically makes the film source movie images clear
35