Panasonic Viera TH-P42VT30Z Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Plasma TV
  5. Viera TH-P42VT30Z
  6. Operating instructions manual

Panasonic Viera TH-P42VT30Z Operating Instructions Manual

Plasma television
Hide thumbs Also See for Viera TH-P42VT30Z:
Table of Contents

Advertisement

Quick Links

Operating Instructions
Plasma Television
Thank you for purchasing this Panasonic product.
Please read these instructions before operating your set and retain
them for future reference.
The images shown in this manual are for illustrative purposes only.
English
Model No.
TH-P42VT30Z
TH-P50VT30Z
TQB4TC0094

Advertisement

Table of Contents
loading

Related Manuals for Panasonic Viera TH-P42VT30Z

Summary of Contents for Panasonic Viera TH-P42VT30Z

  • Page 1 Model No. TH-P42VT30Z TH-P50VT30Z Operating Instructions Plasma Television Thank you for purchasing this Panasonic product. Please read these instructions before operating your set and retain them for future reference. The images shown in this manual are for illustrative purposes only. English...
  • Page 2 Enjoy viewing 3D images and experience an amazing level of multimedia excitement Receive digital terrestrial services using an integrated Digital TV tuner Sharp pictures with HDMI terminal Create home theatre and DVD recorder link-ups with “VIERA Link” without complicated settings! Enjoy rich multimedia Camcorder SD Card...

  • Page 3: Table Of Contents

    How to Use the Menu Functions ··············36 “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. VIERA Connect is a trademark of Panasonic Corporation. Advanced Features “RealD 3D” is a trademark of RealD. Tuning and Editing Channels ···················45 This product is covered by U.S.

  • Page 4: Safety Precautions

    TV to may make the TV unstable, risking injury. Be rain or excessive moisture. This TV must not sure to ask your local Panasonic dealer to be exposed to dripping or splashing water and perform setup.

  • Page 5: Notes

    Important Installation Notices Install the TV on a stable surface If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: •...

  • Page 6: Accessories / Options

    Accessories / Options Standard accessories Remote Control Batteries for the Pedestal Ferrite core (2) Ferrite core • N2QAYB000594 Remote Control (2) (p. 7) (Large size) (Small size) • • • R6 (AA) J0KG00000146 J0KG00000011 POWER SD CARD INPUT (p. 87) (p.
  • Page 7 Do not use the pedestal if it becomes warped or physically damaged. • If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic dealer immediately. During set-up, make sure that all screws are securely tightened. •...
  • Page 8 Securing the TV Insert the pole into the TV, and then fasten securely with the assembly screws • Tighten the four assembly screws loosely at first, then tighten them firmly to fix securely. • Carry out the work on a horizontal and level surface. Arrow mark Hole for pedestal...
  • Page 9 Optional accessories Please contact your nearest Panasonic dealer to purchase the recommended optional accessories. For additional details, please refer to the manual of the optional accessories. • 3D Eyewear Product information (Model No. and release date etc.) is subject to change (Battery type) without notice.

  • Page 10: Basic Connection

    Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. Rear of the TV Aerial Satellite dish Set top box AC 220 - 240 V, 50 / 60 Hz Fully wired HDMI...

  • Page 11: Identifying Controls

    Identifying Controls 1 SD Card slot 9 Power LED • Red: Standby 2 USB2 / 3 port Green: On 3 DIGITAL AUDIO OUT terminal Orange (flash): [USB Charge in Standby] is [On] 4 HDMI1 - 4 terminal Direct TV Recording or One Touch Recording in progress 5 Headphones jack Red with orange flash:...
  • Page 12 Remote Control 7 [VIERA Link Menu] (p. 82) • Accesses VIERA Link Menu POWER INPUT SD CARD 8 OK • Confirms selections and choices MENU ASPECT • Press after selecting channel positions to quickly change programme INFO EXIT 9 [Option Menu] (p.

  • Page 13: Auto Tuning

    Auto Tuning Search and store TV channels automatically. • These steps are not necessary if the setup has been completed by your local dealer. Plug the TV into mains socket and switch On • You can now use the remote control to turn On the TV or switch the TV to Standby mode.
  • Page 14 ∗ Viewing environment mode Home : Recommended mode for viewing at home. Select [Home] for optimal picture / power consumption. [Viewing Mode] is set as [Normal] (p. 37). Shop : Demonstration mode to explain main features of this TV (for in-store display). [Viewing Mode] is set as [Dynamic] (p.
  • Page 15 Setup the network connection Set up the network connection to enable the network service functions such as VIERA Connect, etc. (p. 17, 79). • To set up the wireless connection, the Wireless LAN Adaptor is required. • Please note that this TV does not support wireless public access points. •...
  • Page 16 ■ [Wireless] Select the connection type • If your access point supports WPS (Push Connection Type select Please select network connection type. button), then select this option. If not, confirm select [Search for access point]. Search for access point WPS(Push button) ■...

  • Page 17: Using "Viera Connect

    Using “VIERA Connect” VIERA Connect is a gateway to the internet services unique to Panasonic and has expanded VIERA CAST features greatly. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as photos, videos, games, etc. from VIERA Connect home screen.

  • Page 18: Watching

    Watching TV • Turn power on Mains power On / Off switch should POWER be On. (p. 11) INPUT SD CARD ■ VIERA Connect banner appears MENU ASPECT You can access to VIERA Connect and enjoy the INFO EXIT various contents. •...
  • Page 19 Display Information banner Display Information banner INFO • Also appears when changing a channel Digital TV mode Programme Channel position Current time 20:35 Coronation Street All Digital Channels 20:00 - 20:55 Channel name BBC ONE WALES Rating: PGR Programme Start / Finish time Analogue TV mode 23:35 CH23 SC1...

  • Page 20: Off Timer

    Display the selectable settings for the current programme Check or change the current Select Change programme status instantly select / change select OPTION access store [Video Selection] (Digital TV mode) Allows you to select the image (if available) [Audio Selection / AD] (Digital TV mode) Allows you to select between alternative languages for sound tracks (if available) [Dual Audio] (Digital TV mode) Allows you select stereo / monaural...
  • Page 21 Change aspect ratio Enjoy viewing the image at its optimum size and aspect. Press repeatedly until you reach the desired mode ASPECT ■ If Aspect Selection list is displayed Display Aspect Selection list While the list is displayed, select the mode ASPECT select Aspect Selection...
  • Page 22 Using the Freeview Guide (Digital TV mode) Using the Freeview Guide enables you to select a programme easily, view programme information, etc. The Freeview Guide - Electronic Programme Guide (EPG) provides an on screen listing of the programmes currently broadcast and the future broadcasts over the next seven days (depending on the broadcasters).

  • Page 23: Using The Freeview Guide (Digital Tv Mode)

    Viewing Teletext Teletext services are the text information provided by the broadcasters. The features may vary depending on the broadcasters. What is FASTEXT mode? In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriately coloured button.
  • Page 24 View in multi window Watch TV and Teletext in two windows at once Select Picture and text MENU (press twice) On or Off • Operations can be made only in Teletext screen. FULL / TOP / BOTTOM (TOP) (BOTTOM) Normal (FULL) MENU (Expand the BOTTOM half) (Expand the TOP half)

  • Page 25: Watching External Inputs

    Watching External Inputs Connect the external equipment (VCRs, DVD equipment, PC, etc.) and you can watch through the input. • To connect the equipment (p. 10, 85 - 87) Display the Input selection menu POWER INPUT SD CARD MENU ASPECT Select the input mode connected to the INFO EXIT...
  • Page 26 Operating the equipment with the TV remote control The Panasonic equipment connected to the TV can be directly operated with the below buttons of this TV remote control. BD/DVD / TV switch Switch to BD/DVD to operate Panasonic DVD Recorder, DVD Player,...

  • Page 27: Viewing 3D Images

    When disposing this product, refer “Disposal” (p. 34) and disassemble properly for removing the rechargeable battery. About Charging • Charge by connecting the included charging cable to the USB terminal of a Panasonic TV supporting 3D. Charging with other devices may result in battery leakage, heating or rupture. •...
  • Page 28 • Use the 3D Eyewear when viewing 3D images. • When using the 3D Eyewear, make sure your eyes are on an approximately horizontal level. • If you suffer from myopia (short-sightedness), hyperopia (far-sightedness), astigmatism, or have eyesight differences between the left and right eyes, please use corrective glasses or other such methods to correct your eyesight before putting on the 3D Eyewear.
  • Page 29 Part names and functions 1 Infra-red receiver Receives infra-red signals from the television. The liquid crystal shutter open/close timing is controlled by receiving infrared signals from the television, which provide 3D expression of the images. If the eyewear stops receiving infra-red signal from the television, the power automatically switches off after 5 minutes.
  • Page 30 Attaching Ferrite Core Be sure to attach the provided ferrite core to the charging cable to reduce interference or electrical noise. Attach the ferrite core as close to USB Close the ferrite core until it clicks. connector of the charging cable as shown. Mini USB connector USB connector USB connector...
  • Page 31 Storage and Cleaning • Clean using a soft, dry cloth. Wiping the 3D Eyewear with a soft cloth that is covered in dust or dirt may scratch the eyewear. Shake off any dust from the cloth before use. • Do not use benzene, thinner, or wax on the 3D Eyewear, as doing so may cause the paint to peel off. •...
  • Page 32 Change the view 3D ↔ 2D select 3D Mode Selection POWER INPUT SD CARD 2D→3D MENU ASPECT INFO EXIT ([2D→3D]: 2D mode only) • Switches to Manual mode (see below) ■ Change 3D format (Manual mode) Display [3D Mode Selection (Manual)] OPTION RETURN Press 3D to cycle through the 3D format...
  • Page 33 [3D Settings] (Adjust 3D images) Display the menu POWER MENU INPUT SD CARD “How to Use the Menu Functions” (p. 36) MENU ASPECT Select [Picture] INFO EXIT Select [3D Settings] select OPTION RETURN 3D Settings Access Screen Display access Advanced Settings Lock Settings Copy Adjustment TEXT...
  • Page 34 Disposal A lithium-ion polymer rechargeable battery is built in to the 3D Eyewear. Please discard according to local regulations. When disposing this product, disassemble properly by following the procedure below, and remove the internal rechargeable battery. Do not disassemble this product except when disposing of it. ■...

  • Page 35: How To Use Viera Tools

    How to Use VIERA TOOLS You can access some special features easily by using the VIERA TOOLS function. Display icons of the feature POWER INPUT SD CARD MENU ASPECT Select a feature INFO EXIT select access OPTION RETURN VIERA Link Control TEXT STTL INDEX HOLD...

  • Page 36: How To Use The Menu Functions

    How to Use the Menu Functions Various menus allow you to make settings for the picture, sound, and other functions. Display the menu POWER • INPUT SD CARD Displays the functions that can be set (varies according to the input signal) MENU ASPECT Select the menu...
  • Page 37 Note • In each Viewing Mode and input, [Contrast], [Brightness], [Colour], Picture [Sharpness], [Tint], [Colour Balance], [Vivid Colour], [Eco Mode], [P-NR] and [3D-COMB] can be adjusted and stored to suit your particular viewing requirement. • Set for each input signal. Item Adjustments / Configurations (alternatives) Basic picture mode...
  • Page 38 P-NR Picture Noise Reduction • Off Automatically reduces unwanted picture noise and flicker noise in the • Min contoured parts of a picture • Mid • Not valid on PC signal. • Max Makes still or slow moving pictures look more vivid •...
  • Page 39 Gamma • S Curve / Switches the gamma curve • 1.8 / 2.0 / Please note the numerical values are reference for the adjustment. 2.2 / 2.4 / 2.6 Adjusts more detailed Gamma items [Input Signal Level]: Adjusts the input signal level More Detailed [Gain]: Adjusts the gain of gamma for selected signal level Adjustment ∗...
  • Page 40 Locks for each Viewing Mode and input. Additionally, [Contrast], [Brightness], [Colour], [Sharpness], [Tint], Lock Settings and [Reset Picture Defaults] in the Picture Menu can be locked for [Professional1] and [Professional2]. • Make a note of the PIN number in case you forget it. You can copy the selected [Professional1] or [Professional2] settings to that of the other input.
  • Page 41 Auto Gain Control Adjusts the current volume level if it is extremely different from the • Off previous viewed channel or input mode • On Volume Correction Adjusts the volume of individual channel or input mode Adjusts the low frequency sound Speaker Distance to •...
  • Page 42 Timer Item Adjustments / Configurations (alternatives) Off Timer • Off Sets the time until the TV automatically goes into Standby mode • 15 / 30 / 45 / 60 / 75 / 90 minutes Sets the time the TV automatically goes into Standby mode when no Auto Standby operation is performed for the selected times •...
  • Page 43 Automatically sets the TV to the most suitable energy-saving mode • If you press the OK button, the following items are set as below: [Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save], Eco Navigation [Power Save] [On] [Intelligent Auto Standby] [On (No reminder)] [Auto Standby] [2 hours]...
  • Page 44 VIERA Link Sets to use VIERA Link functions • • Off VIERA Link functions become available when [VIERA Link] is set to [On] • On (p. 80). Adjusts the picture settings according to the content type from the connected equipment via HDMI cable HDMI Content Type •...

  • Page 45: Tuning And Editing Channels

    Tuning and Editing Channels You can make Auto Tuning, listing your favourite channels, skipping unwanted channels, etc. Preparations: POWER Select Digital TV or Display the menu Select [Setup] INPUT SD CARD Analogue TV MENU MENU ASPECT INFO EXIT • The selected mode is displayed on the screen (p. 18). ■...
  • Page 46 Digital TV Tuning Menu [Favourites Edit] - List favourite channels Create your favourite channel lists (Favourites) from various broadcasters (up to 4: [Favourites] 1 to 4). The Favourites lists are available from the Information banner (p. 19) and the Freeview Guide (p. 22). Select a channel to list Add it to the Favourites list Store...

  • Page 47: Start Auto Tuning

    [Auto Tuning] - Set all Digital TV channels automatically Start Auto Tuning Settings are made automatically Automatically retune Digital TV Auto Tuning Digital TV Auto Tuning Scan CH 21 all Digital TV channels This will take about 3 minutes. received in the area. RF Ch Channel Name Type...
  • Page 48 Analogue TV Tuning Menu [Channel List] - Skip unwanted channels / Edit Channels (Change name, Move) You can hide unwanted channels. The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels. Select a channel and reveal / hide select Analogue TV Channel List •...

  • Page 49: Child Lock

    Child Lock You can lock specific channels / AV input terminals and control who watches them. When the locked channel / input is selected, a message appears; by entering the PIN number, you can watch it. Preparations: MENU ASPECT Display the menu Select [Setup] INFO EXIT...

  • Page 50: Input Labels

    Input Labels For easier identification and selection of the input mode, you can label each input mode or skip terminals that are not connected to any equipment. • To select the input mode (p. 25) Preparations: POWER Display the menu Select [Setup] INPUT SD CARD...

  • Page 51: Shipping Condition (Reset Settings)

    Shipping Condition (Reset settings) Resets the TV to its original condition, i.e. no channels tuned in. All settings other than [USB HDD Setup] are reset (channels, picture, sound settings, etc.). Preparations: POWER Display the menu Select [Setup] INPUT SD CARD MENU MENU ASPECT...

  • Page 52: Updating The Tv Software

    Updating the TV Software From time to time, a new version of software may become available for download to enhance the performance or operations of the TV. If there is an update available, a notification banner is displayed when the channel has the update information. EXIT •...

  • Page 53: Usb Hdd / Sd Card Recording

    USB HDD / SD Card Recording You can record the digital TV programmes to the connected USB HDD / SD Card and enjoy playing back in various ways. • Analogue TV programme cannot be recorded to the USB HDD / SD Card. •...
  • Page 54 [USB HDD Setup] - Setup the USB HDD All the USB devices recognized as a mass storage device will be listed. Select the USB HDD for recording and start setup USB HDD Setup select Product Name USB Drive A USB Flash Disk access INFO •...
  • Page 55 Preparing for SD Card You cannot change the settings for the SD Card while recording is in progress. Prepare the SD Card without any data. Insert the SD Card to SD Card Slot • When the SD Card is inserted, switching to Media Label Player will be done automatically.
  • Page 56 Recording the TV programme to USB HDD / SD Card You can record the current programme immediately by using [One Touch Recording]. You can also record the current programme constantly for the selected period by using [REW LIVE TV] so that you can go back or pause the current programme. •...
  • Page 57 ■ To start One Touch Recording Set the position to “TV” Start BD/DVD • No other channel can be selected while the recording is in progress. ■ When more than 2 recording device are available, select recording device Please select recording device select EXIT SD Card...

  • Page 58: Using Media Player

    Using Media Player Media Player allows you to enjoy photo, video or music recorded on an SD Card and a USB Flash Memory and recorded contents on the exclusive recording devices (USB HDD / SD Card). VIERA IMAGE VIEWER is the function of the easy viewing for photos or videos recorded on an SD Card on the TV screen by simply inserting into the SD Card slot.
  • Page 59 Starting Media Player Insert the SD Card or USB Flash Memory (p. 58) • To play back contents in USB HDD, check the connection and settings are completed. (p. 53, 54) When the SD Card is inserted, switching to Media Player will be done automatically.
  • Page 60 Photo mode Supported file format (p. 91) The thumbnail of all the photos in the SD Card or USB Flash Memory will be displayed. Example: Thumbnail - [All photos] • To change the number of photos on a thumbnail All photos Media Player Photo screen at a time ( 7 ×...
  • Page 61 [Single view] - Photos are displayed one at a time. Select the file from the thumbnail of photos to be viewed select access Example: • • To display / hide the To operate Single view Single view operation guide To the previous photo INFO Slideshow To the next photo...
  • Page 62 Item Adjustments / Configurations (alternatives) Selects the indication frame of the slideshow [Off] / [Multi] / [Collage] / [Drift (+ calendar)] / [Drift] / [Gallery (+ calendar)] / [Gallery] / [Cinema] [Multi]: 9 division display like tiled design [Collage]: A photo is displayed at a random position and at a random scale. [Drift (+ calendar) / Drift]: Photos are displayed like flow images.
  • Page 63 Multi Shot 3D This TV can create the 3D photo using a pair of photos in the SD Card and save it into the same SD Card. • This TV can also create the 3D photo from photos in the USB Flash Memory, but cannot save it. •...
  • Page 64 Change the contents You can switch to the other mode of Media Player from the thumbnail view. While the thumbnail is Select the contents displayed, display the All photos Media Player Photo contents selection select access [Photo] “Photo mode” (p. 60) [Video] “Video mode”...
  • Page 65 ■ How to operate playback Example: Playback • • To display / hide the operation guide To change aspect 02/10/2010 11:21 00:15:39 00:02:05 and information banner ASPECT INFO • To the previous title / scene • To operate playback EXIT Rewind RETURN Pause / Playback...
  • Page 66 Item Adjustments / Configurations (alternatives) Allows you to select between selectable sound tracks (if available) Audio Selection • It may take several seconds to change the sound. Turn the subtitle on/off and select the subtitle file (if available) Subtitle [Off] / [Subtitle1] (/ [Subtitle2] ...) Selects the font type, if the subtitles text is not displayed correctly.
  • Page 67 [Create Group]: Two or more contents can be grouped. Select and tick all the desired contents, and then select [Create Group]. [Release Group]: Select the created group you want to release, and then select [Release Group]. (To release several groups at once, tick all the desired groups.) [Exclude from Group]: Select the group and press the OK button to display the grouped contents.
  • Page 68 Audio output Settings You can enjoy the multi-channel sound via an amplifier connected to the DIGITAL AUDIO OUT terminal. • To confirm or change the current sound status “Confirm or change the current status” (p. 65) Display the menu Select [Sound] Select [SPDIF Selection] and set MENU Main Menu...
  • Page 69 Music mode Supported file format (p. 93) The thumbnail of music folders in the SD Card or USB Flash Memory will be displayed. Example: Thumbnail - [Folder view] • To display the information of the highlighted folder Folder view Media Player Music INFO Folder number / Total folder number...

  • Page 70: Using Network Services

    DLNA operations (p. 76 - 79) VIERA Connect™ VIERA Connect is a gateway to the internet services unique to Panasonic and expands VIERA CAST functions greatly. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as photos, videos, games, etc.
  • Page 71 Network connections To use only DLNA features, you can operate the features without a Broadband network environment. To use VIERA Connect features, you need a Broadband network environment. • If you do not have any Broadband network services, please consult your retailer for assistance. •...
  • Page 72 Enables to control the TV from the network equipment (Smartphone, etc.) [On] / [Off] • Depending on the area, this function may not be available. For details, Network Remote Control consult your local Panasonic dealer. • For more information of this function, visit the following website. (English only) http://panasonic.jp/support/global/cs/tv/...
  • Page 73 Network settings for the LAN Cable connection This setting is for the network connection by using the LAN cable. Select [Network Type] and set to [Wired] select Network Setup Connection Test Network Type Wired access / store Access Point Settings If you make the network connection like “Example 2”...
  • Page 74 ■ [Proxy Settings] Select [Proxy Settings] and set the items select IP/DNS Settings Acquire IP Address Auto access IP Address 192.168.11.5 Subnet Mask 255.255.255.0 After settings, return to [Network Setup] screen Gateway 192.168.11.1 RETURN Acquire DNS Address Auto DNS Address 192.168.11.1 Proxy Settings Access...
  • Page 75 Network settings for the Wireless LAN connection This setting is for the network connection by using a Wireless LAN Adaptor. • Confirm the encryption key, settings and positions of your access point before starting setup. For details, read the manual of the access point. Select [Network Type] and set to [Wireless] select Network Setup...
  • Page 76 Using DLNA features ® • Ensure the preparation of the media server, network connections and network settings are completed. “Media server” (p. 70), “Network connections” (p. 71), “Network Setup” (p. 72 - 75) Display icons of the feature POWER INPUT SD CARD Select [Media Server] MENU...
  • Page 77 For photo file [Single view] - Displayed one at a time INFO • To display / hide the operation guide Single view • To operate Single view To the previous photo To the next photo Single view EXIT Slideshow Select RETURN Stop Stop (return to list)
  • Page 78 Photo Setup (for photo contents) Setup the settings for Photo. Display Select [Slideshow Settings] Select the items and set the option select select Slideshow Settings Option Menu menu Slideshow Settings Transition Effect Fade Video Setup Interval 5 seconds OPTION Music Setup access access / Repeat...
  • Page 79 • The services through VIERA Connect are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services. •...

  • Page 80: Viera Link Functions

    As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed. • Please refer to individual manuals for the external equipment. About applicable Panasonic equipment, consult your local Panasonic dealer. Summary of features...
  • Page 81 HDMI cable, and also connect either the optical digital audio cable or RCA cable for audio output from the TV. • Use fully wired HDMI compliant cable. Non-HDMI-compliant cables cannot be utilised. A recommended Panasonic’s HDMI cable part number: • RP-CDHS15 (1.5 m) • RP-CDHS30 (3.0 m) • RP-CDHS50 (5.0 m) Preparations •...
  • Page 82 Features available (Using VIERA Link Menu) [Pause Live TV] You can pause the live TV programme and resume later. Live TV programmes will be recorded on HDD of the connected DIGA Recorder. • This function is available with a DIGA Recorder which has HDD. •...
  • Page 83 [VIERA Link Control] - Operate the connected equipment with VIERA remote control You can control some functions of the connected equipment with this TV remote control by pointing at the TV’s signal receiver. • If you cannot operate, check the settings and the equipment “Summary of features”, “Connection”, “Preparations”...
  • Page 84 [Speaker Selection] - Speaker control You can control the theatre speaker with this TV remote control by pointing at the TV’s signal receiver. • If you cannot operate, check the settings and the equipment “Summary of features”, “Connection”, “Preparations” (p. 80 - 81) Access and control the speaker volume Display [VIERA Link Menu] POWER...

  • Page 85: External Equipment

    TMDS Data2+ 2 TMDS Data2 Shield Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we disclaim any liability or damage arising from operation and/or performance from usage of such other maker’s peripheral devices.

  • Page 86: Component Adaptor

    To play back Aerial RF adaptor (supplied) cable DVD Recorder Composite adaptor (supplied) Fully wired HDMI Rear of the TV compliant cable ∗ ∗ 1 : Only for DVD Recorder HDMI equipment Recorder / Player Fully wired HDMI compliant cable •...
  • Page 87 USB devices USB cable Camcorder / HDMI equipment Fully wired HDMI Rear of the TV compliant cable Camcorder etc. Headphones Less than 10 cm (M3 stereo Ferrite core - Small size (supplied) mini plug) Installing the Ferrite core Pull back the tab Wind the Press the cable cable twice...

  • Page 88: Technical Information

    Technical Information Channel Allocation (Analogue TV mode) CH Display / Receive Channel CH 1 - CH 11 CH 21 - CH 70 CH 74 - CH 78 CH 80 - CH 120 Rating (Digital TV mode) Rating Meaning No Block Not classified General Parental Guidance Recommended...
  • Page 89 HDMI connection HDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non-compression standard. HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment. HDMI-compatible equipment ∗ with an HDMI or DVI output terminal, such as a DVD player, a set top box or game equipment, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
  • Page 90 Input signal that can be displayed COMPONENT (Y, P ), HDMI Mark: Applicable input signal Signal name COMPONENT HDMI 525 (480) / 60i 525 (480) / 60p 625 (576) / 50i 625 (576) / 50p 750 (720) / 60p 750 (720) / 50p 1,125 (1,080) / 60i 1,125 (1,080) / 50i 1,125 (1,080) / 60p...
  • Page 91 • Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the TV. (Panasonic is not liable for any deterioration or damage of recorded data.) USB Flash Memory (for playing back in Media Player)
  • Page 92 .mp4 H.264 BP/MP/HP – Dolby Digital • .mov MotionJPEG This TV supports Motion JPEG H.264 BP/MP/HP TWOS recorded by Panasonic LUMIX SOWT Camera. • Some files may not be played Dolby Digital back depending on these LPCM recording condition. •...
  • Page 93 ■ Music Codec File extension Restrictions .mp3 – • .m4a Copy-protected files cannot be played back. • .wma Copy-protected files cannot be played back. • WMA Pro and WMA Lossless are not supported. Note • The above table is generalised in nature. Due to file encoding variances, some media files that play on other devices, may not play on the TV even though they fulfill the generalised conditions.
  • Page 94 You cannot use two or more same kind of USB devices simultaneously except USB Flash Memory. Note • Additional information for USB devices may be on the following web site. (English only) http://panasonic.jp/support/global/cs/tv/ USB Keyboard • A USB Keyboard which requires a driver is not supported.
  • Page 95 Recording time for the USB HDD / SD Card Recording Recording device Recording mode USB HDD SD Card 1 TB 2 GB 16 GB 48 GB 64 GB For HD broadcast 87 hours 9 minutes 1.5 hours 4.5 hours 6 hours [DR] For SD broadcast 217 hours...

  • Page 96: Faqs

    FAQs Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. White spots or shadow images (noise) • Check the position, direction, and connection of the aerial.
  • Page 97 Interference or If “Signal Quality” or “Signal Strength” are displayed in red, check frozen / disappearing aerial. If problem persists, consult your local Panasonic dealer. • image in Digital TV Turn the TV off with the Mains power On / Off switch, then turn it On...
  • Page 98 Problem Actions • Has the 3D Eyewear been switched On? • Ensure that [3D Mode Selection] is set to [3D]. (p. 32) • Some 3D image signals may not be automatically recognized as 3D images. Set [3D Mode Selection (Manual)] to match the picture format.

  • Page 99: Specifications

    Specifications TH-P42VT30Z TH-P50VT30Z Power rating AC 220 - 240 V, 50 / 60 Hz 1.8 A AC 220 - 240 V, 50 / 60 Hz 2.4 A Normal (Home) mode 123 W 153 W Standby condition 0.4 W 0.4 W Aspect Ratio 16:9 106 cm (diagonal)
  • Page 100 Lens type Liquid Crystal Shutter Usage temperature range 0 °C - 40 °C Charging power supply DC 5 V (supplied by USB terminal of a Panasonic TV) Lithium-ion polymer rechargeable battery DC 3.7 V, 70 mAh Battery Operation time* : Approx. 30 hours Charging time* : Approx.

  • Page 101: Maintenance

    Maintenance First, remove the mains plug from the socket outlet. Display panel, Cabinet, Pedestal For regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints. For stubborn dirt: Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water).

  • Page 102: Warranty

    WARRANTY - New Zealand only NEW ZEALAND Distributed in New Zealand by Panasonic New Zealand Limited 350 Te Irirangi Drive East Tamaki, Private Bag 14911, Panmure Auckland Tel. 09 272 0100 Customer Care Center Email: Customerservice@nz.panasonic.com www.panasonic.co.nz...
  • Page 103 MEMO...
  • Page 104 Warranty Service purposes. Model Number Serial Number M0411-0 Printed in Thailand Web Site : http://panasonic.net © Panasonic Corporation 2011...

This manual is also suitable for:

Viera th-p50vt30zTh-p42ut30z vieraTh-p50ut30z viera

Table of Contents