Panasonic TH-P42U30Z Service Manual

Panasonic TH-P42U30Z Service Manual

Gpf14d-a chassis

Advertisement

TH-P42U30A
Model No.
TH-P42U30Z
GPF14D-A Chassis
© Panasonic Corporation 2011.
Unauthorized copying and distribution is a violation
of law.
ORDER NO.PAVCTH1102004CE
Plasma Television

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic TH-P42U30Z

  • Page 1 ORDER NO.PAVCTH1102004CE Plasma Television TH-P42U30A Model No. TH-P42U30Z GPF14D-A Chassis © Panasonic Corporation 2011. Unauthorized copying and distribution is a violation of law.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions -----------------------------------------------3 11.2. Wiring (1) -------------------------------------------------- 39 1.1. General Guidelines ----------------------------------------3 11.3. Wiring (2) -------------------------------------------------- 40 11.4. Wiring (3) -------------------------------------------------- 40 1.2. Touch-Current Check--------------------------------------3 11.5. Wiring (4) -------------------------------------------------- 41 2 Warning --------------------------------------------------------------4 2.1. Prevention of Electrostatic Discharge (ESD) 12 Schematic Diagram to Electrostatically Sensitive (ES) Devices ----------4 13 Printed Circuit Board...
  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. General Guidelines 1. When conducting repairs and servicing, do not attempt to modify the equipment, its parts or its materials. 2. When wiring units (with cables, flexible cables or lead wires) are supplied as repair parts and only one wire or some of the wires have been broken or disconnected, do not attempt to repair or re-wire the units.
  • Page 4: Warning

    2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor [chip] components.
  • Page 5: About Lead Free Solder (Pbf)

    2.2. About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu). That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.
  • Page 6: Service Navigation

    3 Service Navigation 3.1. PCB Layout Board Name Function Board Name Function Power Supply Data Driver (Lower Right) Non serviceable Data Driver (Lower Left) P-Board should be exchange for service Scan Drive Main AV input, processing Sustain Drive Remote receiver, Power LED, C.A.T.S. sensor...
  • Page 7: Applicable Signals

    3.2. Applicable signals COMPONENT (Y, P ), HDMI * Mark: Applicable input signal Signal name COMPONENT HDMI 525 (480) / 60i 525 (480) / 60p 625 (576) / 50i 625 (576) / 50p 750 (720) / 60p 750 (720) / 50p 1,125 (1,080) / 60i 1,125 (1,080) / 50i 1,125 (1,080) / 60p...
  • Page 8: Specifications

    4 Specifications Power Power rating AC 220-240 V, 50 / 60 Hz 1.4 A Normal (Home) mode 110 W Standby condition 0.4 W Display panel Aspect Ratio 16:9 Visible screen size 106 cm (diagonal) 921 mm (W) × 518 mm (H) 2,073,600 (1,920 (W) ×...
  • Page 9: Technical Descriptions

    5 Technical Descriptions 5.1. Specification of KEY for CI Plus, DTCP-IP and One-to-One 5.1.1. General information: 1. EEPROM (IC8902) for spare parts has the seed of KEY for each. 2. The final KEY data will be generated by Peaks IC (IC8000) when SELF CHECK was done and are stored in both Peaks IC (IC8000) and EEPROM (IC8902).
  • Page 10: Service Mode

    6 Service Mode 6.1. How to enter into Service Mode 6.1.1. Purpose After exchange parts, check and adjust the contents of adjustment mode. While pressing [VOLUME ( - )] button of the main unit, press [i] button of the remote control three times within 2 seconds. 6.1.2.
  • Page 11 6.1.4. Contents of adjustment mode • Value is shown as a hexadecimal number. • Preset value differs depending on models. • After entering the adjustment mode, take note of the value in each item before starting adjustment. Main item Sub item Sample Data Remark ADJUST...
  • Page 12: Option - Mirror

    6.2. Option - Mirror Picture can be reversed left and right or up and down. 00 : Default (Normal picture is displayed) 01 : Picture is reversed left and right. 02 : Picture is reversed up and down. Hint : If the defective symptom (e.g. Vertical bar or Horizontal bar) is moved by selection of this mirror, the possible cause is in A-board.
  • Page 13: Hotel Mode

    6.4. Hotel mode 1. Purpose Restrict a function for hotels. Item Function 2. Access command to the Hotel mode setup menu Hotel Mode Select hotel mode On/Off In order to display the Hotel mode setup menu: Initial INPUT Select input signal modes. While pressing [VOLUME (-)] button of the main unit, Set the input, when each time power is switched press [AV] button of the remote control three times within...
  • Page 14: Data Copy By Sd Card

    6.5. Data Copy by SD Card 6.5.1. Purpose (a) Board replacement (Copy the data when exchanging A-board): When exchanging A-board, the data in original A-board can be copied to SD card and then copy to new A-board. (b) Hotel (Copy the data when installing a number of units in hotel or any facility): When installing a number of units in hotel or any facility, the data in master TV can be copied to SD card and then copy to other TVs.
  • Page 15 6.5.3. Data copy from TV set to SD Card 1. Turn on the TV set. 2. Insert SD card with a startup file (pwd file) to SD slot. On-screen Display will be appeared according to the startup file automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2770 (b) For Hotel : 4850 Data will be copied from TV set to SD card.
  • Page 16 6.5.4. Data copy from SD Card to TV set 1. Turn on the TV set. 2. Insert SD card with Data to SD slot. On-screen Display will be appeared according to the Data folder automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2771 (b) For Hotel : 4851 Data will be copied from SD card to TV set.
  • Page 17: Troubleshooting Guide

    7 Troubleshooting Guide Use the self-check function to test the unit. 1. Checking the IIC bus lines 2. Power LED Blinking timing 7.1. Check of the IIC bus lines 7.1.1. How to access 7.1.1.1. Self-check indication only: Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control for more than 3 seconds.
  • Page 18: Power Led Blinking Timing Chart

    7.2. Power LED Blinking timing chart 1. Subject Information of LED Flashing timing chart. 2. Contents When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit. Blinking Times Contents Check point...
  • Page 19: No Picture

    7.4. No Picture...
  • Page 20: Local Screen Failure

    7.5. Local screen failure Plasma display may have local area failure on the screen. Fig-1 is the possible defect P.C.B. for each local area. Fig-1...
  • Page 21: Disassembly And Assembly Instructions

    8 Disassembly and Assembly Instructions 8.1. Remove the Rear cover 8.4. Remove Side terminal cover 1. See PCB Layout (Section 3) 8.2. Remove the AC inlet 1. Remove the screws (×2 2. Remove the Side terminal cover. Caution: To remove P.C.B. wait 1 minute after power was off for dis- charge from electrolysis capacitors.
  • Page 22: Remove The A-Board

    8.6. Remove the A-Board 8.8. Remove the SN-Board 1. Remove the Tuner unit. (See section 8.5.) 1. Disconnect the flexible cables (SN21, SN22, SN23, SN24, SN25, SN26, SN27 and SN28) connected to the 2. Remove the screws (×2 ) and remove the A-Board. SN-Board.
  • Page 23: Remove The Stand Bracket And The Hanger Metals

    8.10. Remove the Stand bracket and 8.12. Remove the C1-Board the Hanger metals 1. Remove the Stand bracket and the Hanger metal R. (See section 8.10.) 1. Remove the Plasma panel section from the servicing 2. Disconnect the flexible cables (CB1, CB2, CB3, CB4, stand and lay on a flat surface such as a table (covered CB5, CB6 and CB7).
  • Page 24: Remove The Plasma Panel Section From The Cabinet Assy

    8.14. Remove the Plasma panel sec- 8.15. Remove the Attachment metal tion from the Cabinet assy bottom 1. Remove the Radiator plate. (See section 8.14.) 1. Remove the Plasma panel fastening screws (×4 ) and remove the Cabinet assy. 2. Remove the screws (×1 each) and remove the Attach- ment metal bottom (L, R).
  • Page 25: Remove The Glass Holders

    8.17. Remove the Glass holders 8.19. Replace the Plasma panel 1. Remove the Cabinet assy. (See section 8.13.) Caution: A new Plasma panel itself without Hanger metals is 2. Remove the screws (×5 fragile. 3. Remove the Glass holder top. To avoid the damage to new Plasma panel, carry a new 4.
  • Page 26: Measurements And Adjustments

    9 Measurements and Adjustments 9.1. Adjustment 9.1.1. Vsus selection Caution: When Plasma panel or A-board is replaced, Vsus should be set to HIGH. Procedure 1. Go into main item [VSUS] in Service Mode. HIGH will be displayed. 2. Press [OK] button to go to TEST stage. White pattern without On-Screen Display will be displayed during TEST and CONF stage.
  • Page 27 9.1.2. Sub-Contrast adjustment Name of measuring instrument Connection Remarks RF generator Base Band signal generator HD signal generator Steps Remarks Connect IIC cable (bus controller-cable) after banner OSD appear. Note: And after SRQ-L, begin an adjustment 2 seconds later. Sub-contrast adjustment is unadjusted for AV/ HD input.
  • Page 28 Steps Remarks Another procedure Connect IIC cable (bus controller-cable) after banner OSD appear. And after SRQ-L, begin an adjustment 2 seconds later. Adjustment of HD system 1. At 1080i 100% Full White or Split colour bar receive component signal, as shown below. 2.
  • Page 29 9.1.3. White balance adjustment The adjusting method is different according to the PEAKS EEPROM version. [copy adjustment] : Peaks EEPROM ver.1.00- [Differential and copy adjustment] : Peaks EEPROM ver.1.01- Name of measuring instrument Connection Remarks W/ B pattern Panel surface Color analyzer (Minolta CA-100 or equivalent) Steps...
  • Page 30 Steps Remarks [Differential and copy adjustment] Execute adjustment for color temp. [NORMAL], and set data for color temp. [COOL], [WARM] by data shift WB of HD (or PAL) copies the adjustment data from an adjusted format side. Note: The adjustment does only color temp. [NORMAL]. A adjustment value difference from [NORMAL] is written to EEPROM as for [COOL] and [WARM] by operat- ing a [OK] key.
  • Page 33: Block Diagram

    10 Block Diagram 10.1. Main Block Diagram DIGITAL SIGNAL PROCESSOR HDMI1-3 (HDMI2) ETHERNET DATA TMDS DATA ETHERNET LAN CON I/F ETHER PHY HDMI I/F SIF_OUT SIF I/F SD CARD DATA SD CARD SD CARD I/F IFD_OUT SLOT TUNER TUNER I/F USB 1,2 USB I/F PEAKS-sLD2...
  • Page 34: Block (1/4) Diagram

    10.2. Block (1/4) Diagram SPEAKER_L SPEAKER_R JK3001 D3050 JK8531 (SIDE) HEADPHONE DIGITAL JK8650 JK8702 JK4601 JK4600 JK4602 USB1 USB2 AUDIO TU4801 SD CARD ANT IN ETHERNET HDMI2 HDMI1 HDMI3 DIGITAL SIGNAL PROCESSOR TUNER DMD_ IIC0 Q4500 IC4900 AUDIO AMP IC8532 IC8601 SOUND15V ETHER PHY...
  • Page 35: Block (2/4) Diagram

    10.3. Block (2/4) Diagram DIGITAL SIGNAL PROCESSOR IC9300 PD5L VIDEO DATA PLASMA AI VIDEO DATA LVDS DATA H/V Sync Control VIDEO DATA P+3.3V Sub Filed Processor IC9304 P+3.3V P+3.3V SI/SO SOS8_SS IIC0 FLASH I/F FLASH SOS8_SS P_S0 DATA DRIVER CONTROL P_S1 D_UHZ IC5000...
  • Page 36: Block (3/4) Diagram

    10.4. Block (3/4) Diagram POWER SUPPLY COLD COLD AC CORD Fuse AC Vin PHOTO (Live) Detection COUPLER (Neutral) FILTER STANDBY SS11 VOLTAGE CONVERTER T101 FET SW Vsus P+15V FET SW Relay F15V for prevention of inrush current F15V STB5V Drop IC SOUND15V OCP/OVP P+15V...
  • Page 37: Block (4/4) Diagram

    10.5. Block (4/4) Diagram SUSTAIN DRIVE SCAN DRIVE TPVSUS TPVSUS Vsus Vsus P+15V D16618 MAIN H Q16607 IC16131 Q16001 CERS Q16002 IC16684 BUFFER CPH1 CPH1 BUFFER Q16600 TPSS1 IC16784,85 Q16041 IC16151 IC16501 PC16897 Q16601 IPD CIRCUIT Q16401 TPVAD BUFFER BUFFER T16471 Q16402 VAD GEN.
  • Page 39: Wiring Connection Diagram

    11 Wiring Connection Diagram 11.1. Caution statement. Caution: Please confirm that all flexible cables are assembled correctly. Also make sure that they are locked in the connectors. Verify by giving the flexible cables a very slight pull. 11.2. Wiring (1)
  • Page 40: Wiring (2)

    11.3. Wiring (2) 11.4. Wiring (3)
  • Page 41: Wiring (4)

    11.5. Wiring (4)
  • Page 42 Model No. : TH-P42U30A/Z Schematic Diagram Note...
  • Page 43 Model No. : TH-P42U30A/Z Replacement Parts List Note...
  • Page 44 Model No. : TH-P42U30A/Z A-Board (1/12)
  • Page 45 Model No. : TH-P42U30A/Z A-Board (2/12)
  • Page 46 Model No. : TH-P42U30A/Z A-Board (3/12)
  • Page 47 Model No. : TH-P42U30A/Z A-Board (4/12)
  • Page 48 Model No. : TH-P42U30A/Z A-Board (5/12)
  • Page 49 Model No. : TH-P42U30A/Z A-Board (6/12) and K-Board...
  • Page 50 Model No. : TH-P42U30A/Z A-Board (7/12)
  • Page 51 Model No. : TH-P42U30A/Z A-Board (8/12) S-10...
  • Page 52 Model No. : TH-P42U30A/Z A-Board (9/12) S-11...
  • Page 53 Model No. : TH-P42U30A/Z A-Board (10/12) S-12...
  • Page 54 Model No. : TH-P42U30A/Z A-Board (11/12) S-13...
  • Page 55 Model No. : TH-P42U30A/Z A-Board (12/12) S-14...
  • Page 56 Model No. : TH-P42U30A/Z C1-Board (1/2) S-15...
  • Page 57 Model No. : TH-P42U30A/Z C1-Board (2/2) S-16...
  • Page 58 Model No. : TH-P42U30A/Z C2-Board (1/2) S-17...
  • Page 59 Model No. : TH-P42U30A/Z C2-Board (2/2) S-18...
  • Page 60 Model No. : TH-P42U30A/Z SN-Board (1/6) S-19...
  • Page 61 Model No. : TH-P42U30A/Z SN-Board (2/6) S-20...
  • Page 62 Model No. : TH-P42U30A/Z SN-Board (3/6) S-21...
  • Page 63 Model No. : TH-P42U30A/Z SN-Board (4/6) S-22...
  • Page 64 Model No. : TH-P42U30A/Z SN-Board (5/6) S-23...
  • Page 65 Model No. : TH-P42U30A/Z SN-Board (6/6) S-24...
  • Page 66 Model No. : TH-P42U30A/Z SS-Board (1/2) S-25...
  • Page 67 Model No. : TH-P42U30A/Z SS-Board (2/2) S-26...
  • Page 68 Model No. : TH-P42U30A/Z A-Board (Foil Side) S-27...
  • Page 69 Model No. : TH-P42U30A/Z A-Board (Component Side) S-28...
  • Page 70 Model No. : TH-P42U30A/Z K-Board S-29...
  • Page 71 Model No. : TH-P42U30A/Z C1-Board S-30...
  • Page 72 Model No. : TH-P42U30A/Z C2-Board S-31...
  • Page 73 Model No. : TH-P42U30A/Z SN-Board (Foil Side) S-32...
  • Page 74 Model No. : TH-P42U30A/Z SN-Board (Component Side) S-33...
  • Page 75 Model No. : TH-P42U30A/Z SS-Board S-34...
  • Page 76 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks TZTNP01NEUZ A-PRINT COMPLETE 1 (Z) (RTL)PAVCTH TZTNP01NLUA A-PRINT COMPLETE 1 (A) (RTL)PAVCTH N0AE5JK00008 POWER SUPPLY UNIT 1 PAVCTH TNPA5314 C1-PRINT COMPLETE 1 (RTL) TXNC211FHK42 C2-PRINT COMPLETE 1 (RTL)PAVCTH TXNSN11FHK42...
  • Page 77 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C3053 F1J1A106A043 C 10UF, 10V C3054 F1G1C104A077 C 0.1UF 16V C3065 F1G1H5610004 C 560 pF 50 V 1 PAVCTH C3066 F1G1H5610004 C 560 pF 50 V 1 PAVCTH C3067 F1G1E333A091...
  • Page 78 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C4926 F1H1H104A970 C 0.1UF, , 50V C4928 F1J1E4740001 C 0.47UF, 25V 1 PAVCTH C4929 F1J1E4740001 C 0.47UF, 25V 1 PAVCTH C4930 F1G1C104A077 C 0.1UF 16V C4931 F1G1C104A077 C 0.1UF 16V...
  • Page 79 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C8053 F1G1C104A077 C 0.1UF 16V C8054 F1G1C104A077 C 0.1UF 16V C8055 F1G1H1020008 C 1000PF 50V C8100 F1G1E682A123 C 6800 pF 25 V C8102 F1J1A475A087 C 4.7UF, 10V C8104 F1H1C105A145...
  • Page 80 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C8608 F1G1H100A565 C 10PF 50V C8609 F1G1C104A077 C 0.1UF 16V C8611 F1G1C104A077 C 0.1UF 16V C8615 F1J1A106A043 C 10UF, 10V C8616 F1J1A106A043 C 10UF, 10V C8619 F1G1C104A077 C 0.1UF 16V...
  • Page 81 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C9366 F1G1A105A047 C 1UF 10V C9371 F1J1A106A043 C 10UF, 10V C9375 F1G1C104A077 C 0.1UF 16V C9380 F1G1C104A077 C 0.1UF 16V C9389 F1G1A105A047 C 1UF 10V C9392 F1J1A106A043 C 10UF, 10V...
  • Page 82 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C16024 F1L2J332A022 C 3300PF, 630V C16025 F1E2J222A002 C 2200PF, 630V C16041 ECJ1VB1H392K C 3900UF, 50V C16044 F1E2J821A002 C 820PF, 630V C16051 ECJ1VB1H392K C 3900UF, 50V C16061 F1E2J821A002 C 820PF, 630V C16101 F1L2J222A022...
  • Page 83 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C16602 F1H1H2200008 C 22PF, 50V C16603 F1K2J102A014 C 1000PF, 630V C16604 F1K2J102A014 C 1000PF, 630V C16631 F0C2E405A278 C 4UF, 250V 1 PAVCTH C16632 F0C2E405A278 C 4UF, 250V 1 PAVCTH C16641 F1K2J222A014...
  • Page 84 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C17151 ECJ1XC1H102J C 1000PF, J, 50V C17152 ECJ1XC1H102J C 1000PF, J, 50V C17153 ECJ1XC1H102J C 1000PF, J, 50V C17154 ECJ1XC1H102J C 1000PF, J, 50V C17155 ECJ1XC1H102J C 1000PF, J, 50V C17156 ECJ1XC1H102J...
  • Page 85 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks D4672 DZ2J056M0L ZENER DIODE D4673 DZ2J056M0L ZENER DIODE D5350 B0JCMD000066 ZENER DIODE D8716 DA2J10100L DIODE D8720 B0JCMD000066 ZENER DIODE D9806 B0ADCK000001 DIODE 1 PAVCTH D9808 B0ADCK000001 DIODE...
  • Page 86 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks D16583 B3ABB0000210 D16602 DZ2J043M0L ZENER DIODE D16603 B0ACCJ000048 DIODE D16604 B0ADCJ000100 DIODE D16605 B0ACCJ000048 DIODE D16607 B0ACCJ000048 DIODE D16608 B0ECKP000055 DIODE D16609 B0ECKP000055 DIODE D16618 B0ECKP000055 DIODE D16641 B0FCCN000004...
  • Page 87 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks IC8601 C1CB00003491 IC8701 C0DBAYY00931 1 PAVCTH IC8702 C0DBAFG00029 1 PAVCTH IC8706 C0DBGYY00887 IC8707 C0DBAYY00915 1 PAVCTH IC8714 C0DBGYY01682 1 PAVCTH IC8900 TVRS215AB 1 PAVCTH IC8901 TVR***1 1 (A) PAVCTH IC8901 TVR***3...
  • Page 88 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks IC16793 C0DBZMC00006 IC16795 C0CBALC00012 IC16921 C1ZBZ0004292 1 PAVCTH IC17102 C0JBAU000088 IC17201 C0JBAU000088 IC17202 C0JBAU000089 1 PAVCTH JK3000B K1U920A00003 CONNECTOR UNIT 1 PAVCTH JK3001 K2HC103E0030 JACK 1 PAVCTH JK3300 K1FY315A0010...
  • Page 89 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks L8600 J0JHC0000045 CHIP INDUCTOR L8609 J0JHC0000045 CHIP INDUCTOR L8701 G1C6R8MA0445 INDUCTION COIL 1 PAVCTH L8702 G1C6R8MA0445 INDUCTION COIL 1 PAVCTH L8704 J0JGC0000020 CHIP INDUCTOR L8705 D0GBR00J0004 M 0 OHM J 1/10W...
  • Page 90 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks Q16101 B1CFRM000015 Q16102 B1CFRM000023 1 PAVCTH Q16141 B1HFPFA00001 TRANSISTOR Q16161 B1HFPFA00001 TRANSISTOR Q16251 B1ABCF000231 TRANSISTOR Q16280 B1ABCE000015 TRANSISTOR Q16401 B1JBDN000004 TRANSISTOR 1 PAVCTH Q16402 B1JBDN000004 TRANSISTOR 1 PAVCTH Q16421 B1JBDN000004...
  • Page 91 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R1126 D0GA102JA023 M1KOHM, J.1/16 W R1127 D0GA472JA023 M 4.7KOHM, J,1/16W R1128 D0GA472JA023 M 4.7KOHM, J,1/16W R1129 D0GA472JA023 M 4.7KOHM, J,1/16W R2051 D1BA6651A014 M6.65KOHM,J.1/16 W 1 PAVCTH R2128 D1BA7151A014...
  • Page 92 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R3205 D1BB75R0A055 M 75 OHM,J.1/10W R3206 D0GA393JA023 M 39KOHM,J,1/16W 1 PAVCTH R3207 D0GA393JA023 M 39KOHM,J,1/16W 1 PAVCTH R3209 D1BB75R0A055 M 75 OHM,J.1/10W R3301 D1BB75R0A055 M 75 OHM,J.1/10W R3302 D1BB75R0A055...
  • Page 93 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R4931 D0GA221JA023 M220 OHM, J.1/16 W R4932 D0GA222JA023 M 2.2KOHM, J,1/16W R4933 D0GA222JA023 M 2.2KOHM, J,1/16W R4941 D1BB1403A055 M 140KOHM,J.1/10W R4942 D1BB1403A055 M 140KOHM,J.1/10W R4971 D0GA103JA015 M 10KOHM,J,1/16W...
  • Page 94 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R8382 D1BA75R0A014 M 75 OHM,J.1/16 W R8383 D1BA75R0A014 M 75 OHM,J.1/16 W R8384 D1BA75R0A014 M 75 OHM,J.1/16 W R8385 D0GA103JA015 M 10KOHM,J,1/16W R8386 D0GA103JA015 M 10KOHM,J,1/16W R8387 D0GA103JA015...
  • Page 95 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R8710 D0GA560JA023 M 56 OHM, J,1/16W R8755 D0GA104JA023 M100KOHM, J.1/16 W R8756 D0GB390JA065 M 39 OHM,J,1/10W 1 PAVCTH R8757 D1BB4301A055 M4.30KOHM,J.1/10W R8758 D1BB2402A055 M 24KOHM,J.1/10W R8759 D1BB6041A055 M 6.04KOHM,J.1/10W...
  • Page 96 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R9226 D0GA470JA023 M 47 OHM, J,1/16W R9247 D0GA470JA023 M 47 OHM, J,1/16W R9307 D0GA470JA023 M 47 OHM, J,1/16W R9308 D0GA470JA023 M 47 OHM, J,1/16W R9310 D0GAR00J0005 M 0 OHM, 1/16W...
  • Page 97 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16132 D0GB101JA065 M 100 OHM,J,1/10W R16133 D1BD2700A044 M 270 OHM,J.1/8 W R16134 D0GD750JA059 M 75 OHM,J,1/4W R16135 D0GB4R7JA065 M 4.7 OHM J 1/10W 1 PAVCTH R16137 D0GZ1R0JA020 M 1 OHM, J,1/2W R16138 D0GF561JA047...
  • Page 98 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16416 D0GB103JA065 M 10K OHM J 1/10W R16421 D0GF7R5JA047 M 7.5 OHM,J, 1/3W R16422 D0GF7R5JA047 M 7.5 OHM,J, 1/3W R16441 D0GF5R6JA047 M 5.6 OHM,J, 1/3W R16451 D0GF5R6JA047 M 5.6 OHM,J, 1/3W R16466 D0GF473JA048...
  • Page 99 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16591 EXB38V472JV M 4.7 kOHM 1/16 W R16594 D0GB472JA065 M 4.7KOHM, J,1/10W R16601 D0GF1R0JA047 M 1 OHM,J,1/3W R16604 D0GD331JA052 M 330 OHM,J,1/4W 1 PAVCTH R16605 D0GD220JA059 M 22 OHM,J,1/4W 1 PAVCTH...
  • Page 100 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16833 ERG1SJ683 M 68KOHM, J, 1W R16834 ERG1SJ683 M 68KOHM, J, 1W R16838 ERG2FJS104D M 100KOHM, J, 2W R16841 D0GB472JA065 M 4.7KOHM, J,1/10W R16842 D0GD102JA052 M 1.0KOHM,J,1/8W 1 PAVCTH R16844 ERA6YEB242...
  • Page 101 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R17132 D0GZ1R0JA020 M 1 OHM, J,1/2W R17134 D0GD224JA052 M 220KOHM,J,1/8W 1 PAVCTH R17135 D0GB681JA065 M 680 OHM,J,1/10W 1 PAVCTH R17138 EXB38V470J M 47 OHM 1/16 W R17139 EXB38V470J M 47 OHM 1/16 W R17140 EXB38V681J...
  • Page 102 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R17252 D1BB49R90002 M 49 OHM,J.1/10W R17253 D1BB49R90002 M 49 OHM,J.1/10W R17254 D1BB49R90002 M 49 OHM,J.1/10W R17255 D1BB49R90002 M 49 OHM,J.1/10W R17256 D1BB49R90002 M 49 OHM,J.1/10W RM2810 B3RAD0000168 REMOTE SENSOR K1KY02B00012...
  • Page 103 Model No. : TH-P42U30A/Z Exploded View 1 S-62...
  • Page 104 Model No. : TH-P42U30A/Z Exploded View 2 S-63...
  • Page 105 Model No. : TH-P42U30A/Z Packing 1 S-64...
  • Page 106 Model No. : TH-P42U30A/Z Packing 2 S-65...
  • Page 107 Model No. : TH-P42U30A/Z Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks J0KG00000146 FERRITE CORE PACK K2AHYH000042 AC INLET WITH CABLE 1 PAVCTH K2CK3YY00024 AC CORD MD42F14A1J PLASMA DISPLAY PANEL N2QAYB000604 REMOTE CONTROL 1 PAVCTH TBL5ZA3035 STAND POLE 1 PAVCTH TBL5ZX0051...

This manual is also suitable for:

Th-p42u30aTh-p42u30az

Table of Contents