Option Buttons; Indicator Light Above The Start/Pause" Button - Siemens WFXD8400UC Operating, Care And Installation Instructions Manual

Symbol for Mode: Quick
Wash"
This symbol is displayed if Mode:
Quick Wash" was selected.
X
Symbol for Mode: Power
Wash"
This symbol is displayed if Mode:
Power Wash" was selected.
o
Symbol for Pre Soak
This symbol is displayed if
Pre Soak: on was selected in the
menu.
Z
Symbol for signal
This symbol is displayed if the signal
volume was not set to off.
G
Symbol for child lock
This symbol is displayed if Child
lock: on was selected in the menu.
20

Option buttons

bleach
When this button is pressed,
a bleach cycle will be added to
the selected cycle.
The washing cycle time is extended
accordingly.
extra rinse
When this button is pressed, an
additional rinsing cycle will be
added to the selected cycle.
Washing cycle time is extended
accordingly.
antiCrease
When this button is pressed, a
gentler spin speed with subsequent
fluffing is used. After the spin cycle
the laundry is arranged loosely in
the drum - wrinkling is reduced.
Washing cycle time is extended
accordingly.
Remove the laundry as soon as
i
the spin cycle is complete.
Indicator light above
the start/pause"
button
The indicator light conveys the
following information:
- Indicator light flashing red:
Program can be started.
Adding laundry is possible
- Indicator light is lit red:
Program is running.
Adding laundry is not possible
because the door is locked for
safety reasons.
Laundry may be added after
pressing the start/pause button.
Exception: If the child lock was
i
selected, the indicator light is
off. At the end of the program,
the door is locked!