Buttons - Siemens WG44G2FNDN User Manual And Installation Instructions

Buttons

8 Buttons
The selection of programme settings depends on the programme that is set.
Buttons
Button
⁠ i-Dos
°C
⁠ 3 s
Selection
Start
¡
Cancel
¡
Pause
¡
Activate
¡
Deactivate
¡
Multiple selection
Activate
¡
Deactivate
¡
Setting the ba-
¡
sic dosage
amount
Up to 24 hours
- 90
- 1400
Activate
¡
Deactivate
¡
More information
Start, cancel or pause the pro-
gramme.
Activate or deactivate a shorter pro-
gramme duration.
Note: Energy consumption increases.
The washing result is not affected by
this.
Select the type of stain.
The temperature, drum movement and
soaking time are all adjusted to suit
the type of stain.
Briefly press the button to activate or
deactivate the intelligent dosing sys-
tem for fabric softener
tergent .
Press and hold the button for approx.
3 seconds to set the basic dosage.
→ Page 33
Set the programme end time.
The programme duration is already in-
cluded in the set number of hours.
Once the programme has started, the
programme duration is displayed.
Adjust the temperature.
Set temperature in °C.
Adjust the spin speed or deactivate
the spin cycle.
Set spin speed in rpm.
If is selected, the water is drained
and the spin cycle is deactivated. The
laundry stays wet inside the drum.
→ "Childproof lock", Page 32
Buttons en
or liquid de-
23