Related Manuals for Siemens Silver WD 1000 TOP WD 1200
Summary of Contents for Siemens Silver WD 1000 TOP WD 1200
- Page 1 Operating and installation instructions ͣ Stop ͣ Stop ͣ Stop Silver WD 1000 Silver WD 1000 TOP WD 1200 TOP WD 1200...
- Page 2 If you need an English user manual, please contact our local CS center/station specified in the "Washing Machine CS network" in your washing machine package or call our customer service free hotline (8008289828) for free supply. Thanks. Web site: http://www.siemens - ha.com.cn Email: Careline.China@BSHG.com Address: 66.
-
Page 3: Table Of Contents
Contents Page Important information Notes on disposal ......Your new machine s packaging ........Your old machine . - Page 4 ͣ Stop ͣ Stop ͣ Stop ͣ Stop ͣ Stop ͣ Stop 17 16 ͣ Stop ͣ Stop ͣ Stop 17 16...
-
Page 5: Your Old Machine
Notes on disposal Safety precautions and warnings The new machine s packaging ! The washing machine must be installed and ! Dispose of packing materials in a respon- operated in a room with the drain. sible manner. ! Make sure that the power supply system ! Keep packing materials out of reach of (voltage;... -
Page 6: Getting To Know Your Washing Machine
Safety precautions and Getting to know your machine warnings Please look at figures 1 , 2 , 3 , 4 and 5 Taking care of your machine: in these operating instructions. The item numbers mean the following: ! Do not climb onto the machine. ! Do not lean against the opened door. -
Page 7: Function Buttons
Programme, temperature and Function buttons (ON/OFF drying time selectors and additional functions) Fig. Fig. The programme selector is used to set the ON / OFF machine to required programme, before the As soon as this button is pressed, the machine ON/OFF button is pressed, by turning starts the selected programme. -
Page 8: Special Functions
Sensible self-balance system There is a sensible self-balance system in SIEMENS washing/drying machine. When the machine is in the spin process of dewatering, the washing machine will automatically sense the unbalanced load caused by the clothes. If... -
Page 9: Programme Table
Programme table (TOP WD1200) Detergent Additional Always follow the and fabric functions manufacturers on the softener care label. Programme Prewash 5 kg 30 - 90 124.5 5 kg Normal 60 - 90 109.5 Light 5 kg 40 - 60 5 kg 30 - 40 Short 58.5... - Page 10 Programme table (Silver WD1000) Detergent Additional Always follow the and fabric functions manufacturers on the softener care label. Programme Prewash 5 kg 30 - 90 124.5 Normal 5 kg 60 - 90 109.5 5 kg 40 - 60 Light 5 kg Short 30 - 40 58.5...
-
Page 11: Gentle Dry
Programme table: drying Cottons + Linens (cotton, linen) Dry weight in kg Drying time selector Programme selector Cupboard dry 50 - 60 60 - 70 70 - 80 Iron dry 40 - 50 50 - 60 60 - 70 70 - 80 Easy-care / synthetics Dry weight in kg Drying time selector... -
Page 12: Detergents And Fabric-Care Additives
Detergents and fabric-care additives Fig. 11 , 12 Frequent use of insufficient detergent will even- tually become noticeable as follows: You can use detergent which is suitable for - washing appears grey or not properly clean front loading automatic washing machines. - grey-brown stains (grease marks) appear on ! Never use detergents for impeller type as the washing... -
Page 13: Preparing Laundry For Washing
Preparing laundry for washing Sorting the laundry Practical tips Sort the laundry according to the symbols Remove any loose items or metal objects, on the fabric care labels. such as safety pins, paper clips, etc. from ! Knitted garments or garments with a wool the laundry. -
Page 14: Preparing Laundry For Drying
Preparing laundry for drying Practical tips Sort the laundry according to the symbols on the fabric care labels. Only tumble-dry textiles which have been washed, rinsed and spun. Only put items in the machine which are label- Remove as much water as possible from led as suitable for tumble-drying or bear the the laundry. -
Page 15: Ing The Door / Loading The Machine / Closing The Door
Opening the door / loading the First wash cycle machine / closing the door Carry out the first wash cycle without laundry to remove any water left over from the factory Open the door tests. 1. Check that the transit bolts have been Pull the handle on the door towards you removed from the back of the machine (Fig. -
Page 16: Setting The Programme / Starting The Programme
Setting the programme / Starting the programme / Programme sequence / Altering the programme Your automatic washer/dryer can be used in Washing and drying without any three ways: interruption washing only 1. Before pressing the ON/OFF button, turn drying only the programme selector clockwise until it washing and drying without a break in reaches the required programme.( Fig. - Page 17 End of washing programme End of drying programme All programmes end automaticaly after the spin The drying time selector has reached its end cycle, and then door lock lamp will turn on. position. The door can be opened. 1. Take the laundry out of the machine imme- Switching the machine OFF diately to prevent creasing.
-
Page 18: Cleaning Your Machine
Cleaning / Maintenance / Frost Protection Cleaning the pump Before you begin any maintenance work, Fig. 15 , 16 , 17 unplug the machine or switch off the fuse. Turn the tap off. The pump must be cleaned: Cleaning your machine if the pump has been blocked by some foreign object, such as a button or paper ! Never use solvents, as these can damage... -
Page 19: Cleaning The Filters In The Water Inlet
Cleaning / Maintenance / Frost Protection Cleaning the filters in the water inlet Frost protection Fig. 18 If the machine is located in a room which is The filters in the water inlet must be cleaned if exposed to freezing temperatures, any residual no or insufficient water flows into the machine water in both the pump and the water inlet when the tap is turned ON. -
Page 20: Troubleshooting
Troubleshooting ! Only qualified technicians are permitted to repair electrical appliances. Repairs done by unauthorised persons can lead to considerable damage. Problems Possible causes / remedies The power indicator light - The plug is not correctly, or only loosely, inserted into the socket. does not illuminate - A fuse has blown in the domestic wiring. -
Page 21: Customer Service
Troubleshooting Spin for dewatering at lower To protect the machine, the sensible selfbalance system starts when clothes are too light/heavy or single item causing un-balance speed only; or even no spin inside the washing machine, then the machine can only operate operation at lower speed, or stop operation. -
Page 22: Built-Under Or Built-In Appliance Installation
Built-under or built-in Installing the machine appliance installation ! When installing and connecting the ma- chine, special attention must be paid to the The appliance must be built under or built in safety advice and warnings which have prior to connecting the power supply. been identified with an exclamation mark ! The appliance can be built into or under a kitch- Always comply with all regulations issued by... -
Page 23: Aligning The Machine
Align the machine Water supply - cold only Fig. 8 Fig. 19 , 21 , 22 ! The machine must be perfectly level with all For the water connection a standard cold- four feet standing on the floor. It must not water line with a minimum water pressure rock from side to side. -
Page 24: Drainage
Water Supply Intallation Drainage If you use Chinese type water inlet pipe, ! When installing the machine, do not bend the water connection see fig. 19 , 21 , 22 drain hose or pull on it. Please observe the following install steps ! When draining into a sink the drain hose carefully. - Page 28 Contents of this brochure could be changed without written notice. Product Standard: GB 4706.1-1998 GB 4706.24-2000 GB 4706.26-2000 Part No.: 5120003356 Version: Valid date: 2003.1...