Line Keys - Aastra Office 70 User Manual

Supplementary features
I Tracing Malicious Calls
Your are being threatened or molested by a call. You want to identify the caller.
Using the MCID function (MCID: Malicious Call Identification), the provider records the following
call data: Your phone number, the caller's phone number, and the date and time of the call.
MCID has to be enabled by your provider. Your provider will inform you about accessing the
recorded call data.
This function must be stored under a Foxkey or a function key (see Chapter
page 61).

Line Keys

This section explains the different options provided by your phone, if your system administrator has
assigned you one or more configurable keys as Line keys. Line keys turn your phone into a key phone.
A line has a number which can be used to make an external or internal call. One or usually sev-
eral phones can be connected to this line, for example, in a travel agent's all the staff assigned
to handling Europe as a travel destination. A Line key has an LED to indicate the line's status and
lets you answer calls on that line.
If, for example, level 3 of the Office DKBM expansion key module is activated and the Team key
on level 1 receives a call, the call is signalled by the red blinking LED in position 1. For more
information about the Office DKBM expansion key module, please refer to chapter
expansion key module Office
If your phone has one or more Line keys, the configurable key at the very top is always your per-
sonal Line key (applies only to communication systems prior to I7.5). For communication sys-
tems beginning with I7.6 you can freely choose your personal key.
46
During a call:
Press the function key for MCID (MCID).
After the call do not hang up: press the function key for MCID (MCID) while you
hear the busy tone.
DKBM", page 15.
"Configuring Keys",
"Using the