Resetting The Date And Time - Sony Handycam Vision CCD-TRV63 Operating Instructions Manual

Resetting the date and time

The clock is set to East Coast Standard Time at the factory.
The date and time are held in memory by the lithium battery. If you replace the lithium
battery with the battery pack or other power source connected, you need not reset the
date and time.
You must reset the date and time when the lithium battery becomes dead with no
power source installed.
First, set the year, then the month, the day, the hour and then the minute.
(1) While the camcorder is in the standby mode, press MENU to display the
MENU settings.
(2) Turn the SEL/PUSH EXEC dial to select
(3) Turn the SEL/PUSH EXEC dial to select CLOCK SET, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to adjust the desired year, then press the dial.
(5) Set the month, day and hour by turning the SEL/PUSH EXEC dial and
pressing the dial.
(6) Set the minute by turning the SEL/PUSH EXEC dial and pressing the dial by
the time signal. The clock starts to move.
(7) Press MENU to make the MENU settings disappear. The time indicator
appears. Press TIME to make the time indicator disappear.
1,
MENU
7
4
1999 JAN 1 1999 JAN
12 00 AM 12 00 AM
2
S E T U P M E N U
CLOCK SET
AUTO DATE
AUTO TV ON
TV INPUT
LTR SIZE
DEMO MODE
6
S E T U P M E N U
CLOCK SET
AUTO DATE
AUTO TV ON
TV INPUT
LTR SIZE
DEMO MODE
RETURN
1
[MENU] : END
, then press the dial.
S E T U P M E N U
CLOCK SET JAN 1 1998
AUTO DATE 12:00:00AM
AUTO TV ON
TV INPUT
LTR SIZE
DEMO MODE
RETURN
[MENU] : END
S E T U P M E N U
CLOCK SET
AUTO DATE
JUL 4
1999
AUTO TV ON
TV INPUT
LTR SIZE
DEMO MODE
5 30 PM RETURN
[MENU] : END
3
S E T U P M E N U
CLOCK SET
AUTO DATE
JAN 1
1998
AUTO TV ON
TV INPUT
LTR SIZE
DEMO MODE
RETURN 12 00 AM
[MENU] : END
JUL 4 1999
5:30:00PM
57