Resetting The Date And Time - Sony Handycam DCR-TRV203 Operating Instructions Manual

Resetting the date and time
The clock is setto East Coast Standard Time at the factory.
The date and time are held in memory by the lithium battery. If you replace the lithium
battery with the battery pack or other power source connected, you need not reset the
date andtime.
You mustreset thedate andtime when the lithium battery becomesdeadwithno
powersource installed.
First, set the year, then the month, the day, the hour and then the minute.
(1) While the camcorder is in the standby mode, press MENU to display the
MENU settings.
(2) Turn the SEL/PUSH EXEC dial to select 8, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select CLOCK SET, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to adjust the desired year, then press the dial.
(5) Set the month, day and hour by turning the SEL/PUSH EXEC dial and
pressing the dial
Set the minute by turning the SEL/PUSH EXEC dial and pressing the dlal by
the time signal. The clock starts to move. _. mmmmm
(6)
(7)
Press MENU to make the MENU settings disappear. The time indicator
appears.
3
8
The year changes as follows:
1998 _ 1999 _- .... --_ 2029
T T
Note on the time indicator
The internal clock of your camcorder operates on a 12-hour cycle.
• 12:00 AM stands for midnight.
• 12:00 PM stands for noon.
59