Sony Handycam Vision CCD-TRV63 Operating Instructions Manual page 36

Using special effects – Digital effect
(1) While your camcorder is in the standby or recording mode, press DIGITAL
(2) Turn the SEL/PUSH EXEC dial to select the desired digital effect mode.
(3) Press the SEL/PUSH EXEC dial. The indicator lights up and the bars appear.
(4) Turn the SEL/PUSH EXEC dial to adjust the effect.
Items to adjust
STILL
FLASH
LUMI.
TRAIL
SLOW SHTR
OLD MOVIE
The more bars there are on screen, the stronger the digital effect. The bars appear in the
following modes: STILL, FLASH, LUMI. and TRAIL.
1
DIGITAL EFFECT
2
To cancel the digital effect
Press DIGITAL EFFECT. The digital effect indicator disappears.
36
EFFECT. The digital effect indicator appears.
The indicator changes as follows:
STILL ˜ FLASH ˜ LUMI. ˜ TRAIL ˜ SLOW SHTR ˜ OLD MOVIE
In the STILL and LUMI. modes, the still picture is stored in memory.
The rate of the still picture you want to superimpose on the moving
picture
The interval of flash motion
The color scheme of the area in the still picture which is to be
swapped with a moving picture
The vanishing time of the incidental image
Shutter speed. The larger the shutter speed number, the slower the
shutter speed.
No adjustment necessary
LUMI.
3
4
LUMI.