Sony Handycam Vision CCD-TRV63 Operating Instructions Manual page 52

Changing the MENU settings
Note
When you let the subject monitor the shot (Mirror mode), the menu display does not
appear.
Menu items are displayed as the following six icons:
Selecting the mode setting of each item
Menu items differ according to whether the POWER switch is set to VTR or CAMERA.
Icon/item
D ZOOM
16:9WIDE
STEADYSHOT
N.S. LIGHT
WIND
PHOTO
Notes on the SteadyShot function
• The SteadyShot function will not correct excessive camera-shake.
• Attachment of a conversion lens (not supplied) may influence the SteadyShot
function.
• SteadyShot does not operate in the 16:9FULL mode. If you set STEADYSHOT to ON
in the MENU settings, the
52
CAMERA SET
VTR SET
LCD SET
TAPE SET
SETUP MENU
OTHERS
Mode Meaning
ON To activate digital zoom. More than 20× to 360×
zoom is performed digitally (p. 16)
r OFF To prevent the deterioration of the picture quality
r OFF —
CINEMA To record in the CINEMA mode (p. 29)
16:9FULL To record in the 16:9FULL mode
r ON To compensate for camera-shake
OFF To cancel the SteadyShot function. Natural
pictures are produced when shooting a stationary
object with a tripod.
r ON To use the NightShot Light function (p. 19)
OFF To cancel the NightShot Light function
r OFF —
ON To reduce wind noise when recording in strong
wind
r NORMAL To activate the normal photo function
FADE To activate the fade photo function
SHUTTER To activate the shutter photo function
indicator flashes.
r is the factory setting.
POWER
switch
CAMERA
CAMERA
CAMERA
CAMERA
CAMERA
CAMERA