Pausing A Tv Broadcast (Tv Pause) - Sony RDR-HXD870 Operating Instructions Manual

b
Notes
• If the outlines of the images on your screen
become blurred, set "BNR" and/or "MNR" to
"Off."
• Depending on the disc or the scene being played,
the above BNR or MNR effects may be hard to
discern. Also, these functions may not work with
some screen sizes.
• The following settings are not available for the
signals output from the HDMI jack.
– "Sharpness"
– "White Enhancer"
– "Black Enhancer"
– "Black Level"
– "Gamma Correction"
– "Hue"
– "Chroma Level"
70
Pausing a TV Broadcast
(TV Pause)
HDD
You can pause a current TV broadcast tuned
in by the recorder's tuner, and record it on the
HDD, then continue watching the
programme at a later time. This is useful
when you receive an unexpected phone call
or visitor while watching TV.
To use the "TV Pause" function, set "TV
Pause" to "Recorder's Tuner" (default) in the
"Options 2" setup (page 135).
m
TV PAUSE
x REC
STOP
1
While viewing a TV broadcast tuned in
by the recorder's tuner, press TV
PAUSE.
The picture pauses, and the recorder
starts recording the current TV channel
to the HDD.
It may take up to 10 seconds to start
recording.
2
Press H to resume watching the
programme.
You can fast forward/fast reverse, pause,
or stop the programme using m/M,
X and x without affecting the recording.
3
Press x REC STOP to stop recording.
M
H/X/x