Hookups And Settings; Hooking Up The Recorder; Step 1: Connecting The Aerial Cable - Sony RDR-HXD870 Operating Instructions Manual

Hookups and Settings

Hooking Up the Recorder

Follow steps 1 through 6 to hook up and
adjust the settings of the recorder. Do not
connect the AC power cord (mains lead) until
you reach "Step 4: Connecting the AC Power
Cord (Mains Lead)" on page 22.
b
Notes
• See "Specifications" (page 143) for a list of
supplied accessories.
• Plug in cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the
components to be connected.
• You cannot connect this recorder to a TV that
does not have a video input jack.
• Be sure to disconnect the AC power cord (mains
lead) of each component before connecting.
14
Step 1: Connecting the
Aerial Cable
This recorder has separate built-in TV tuners
for terrestrial digital and terrestrial analogue
TV broadcasts. Select one of the following
hookups.
When you receive
Digital terrestrial
broadcasting
Terrestrial
b
Note
Analogue broadcasts are scheduled to end at
different times, depending on the country/area.
After analogue broadcasts end in your area, you
will not be able to use hookup B to view TV
broadcasts. At that time, change to hookup A to
view digital broadcasts.
Hookup
A (page 15)
B (page 16)