Channel Swapping; G-Code Ch Setting - Sony RDR-HXD870 Operating Instructions Manual

Channel Swapping

After the programme positions have been set,
you can change the order of each programme
position in the display list.
1
Select "Channel Swapping" in "Analog
Tuner," and press ENTER.
2
Select "Next Screen," and press ENTER.
3
Press M/m to select the programme
position number you want to swap, and
press ,.
• To display other pages, press ./
> repeatedly.
4
Press M/m to select the programme
position number to swap for the one
selected in step 3, and press ENTER.
The programme position numbers are
swapped.
• To swap the programme position
number of another station, repeat from
step 3.

G-Code CH Setting

Setting up your recorder involves
coordinating the TV programme position (the
number you turn to on your TV or recorder to
watch a programme) with the guide channel
(the number that's assigned to that channel in
your TV programme guide).
To find the guide channel numbers, look at
the "Channel Line-up Chart" in the
programme guide for your area that features
G-Code numbers.
Use the Channel Line-up Chart to coordinate
the guide channel number with the TV
programme position.
1
Select "G-Code CH Setting" in "Analog
Tuner," and press ENTER.
2
Select "Next Screen," and press ENTER.
3
Select the guide channel number
assigned in the programme guide using
M/m.
To go to the previous/next page, press
./>.
4
Select "Preset" (the TV channel number
or station name) using </,.
5
Repeat steps 3 and 4 for each guide
channel number that does not match the
TV channel number.
119