Connecting Cables To The Computer - Fujitsu Siemens Computers SCENICVIEW P17-1A Operating Manual

Connecting cables to the computer

Information on the computer connections and interfaces is contained in the operating manual for
your computer.
If your computer has two monitor ports ("onboard" screen controller and separate
i
graphics card), the monitor port for the separate graphics card is usually active.
► Connect the data cable to the (active) monitor port on the computer and secure the plug-in
connection by tightening the safety screws.
► Insert the other plug of the audio line in the audio output of the computer.
► Plug the connector of the mains cable provided into the monitor outlet of the computer or into a
properly earthed outlet and ensure a safe connection.
► Plug the power connector of the computer into a properly grounded mains outlet.
When you start working with your monitor for the first time you should install the
i
appropriate graphics drivers for your application software. Details of how to do this are
provided in the documentation on your screen controller/the associated driver software.
A26361-K960-Z101-1-5E19
Colour Monitor
SCENICVIEW P17-1A
English - 11