Connecting Cables To The Computer - Fujitsu Siemens Computers SCALEOVIEW H22-1W Operating Manual

SCALEOVIEW H22-1W
► If necessary, insert one plug of the USB cable in the USB port (10) on the monitor and make
sure it is properly engaged.
► Plug the power cable supplied into the power connector (1) of the monitor.
► Mount the cover over the connections.
A lock (Kensington Lock) can be mounted in the security slot (14) to protect the monitor
i
from theft. A Kensington Lock is not included in the consignment of the monitor.

Connecting cables to the computer

Information on the computer connections and interfaces is contained in the operating manual for your
computer.
If your computer has two monitor ports ("onboard" screen controller and separate
i
graphics card), the monitor port for the separate graphics card is usually active.
► Connect the data cable to the (active) monitor port on the computer and secure the plug-in
connection by tightening the safety screws.
► Insert the other plug of the each audio cable in the audio ports of the computer.
► Insert the other plug of the USB cable into a USB port of the computer.
► Plug the connector of the mains cable provided into the monitor outlet of the computer or into a
properly earthed outlet and ensure a safe connection.
12 A26361-K1118-Z120-1-7619, edition 3