Connecting Cables To The Computer - Fujitsu Siemens Computers C384FA-M Operating Manual

Ê
Plug the power adapter cable into the power connector (3) of the monitor.
Ensure proper cable routing so that the cover of the monitor base can be mounted again.
i
Ê
Refit the rear monitor cover and the upper cover of the monitor base.

Connecting cables to the computer

Information on the computer connections and interfaces is contained in the operating manual for
your computer. In order for the multimedia functions to be operable, a sound card (audio controller)
must be installed in your computer and properly configured.
If your computer has two monitor ports ("onboard" screen controller and separate
i
graphics card), the monitor port for the separate graphics card is usually active.
4
A26361-K826-Z100-2-5E19
DC -IN 12V
3
Colour monitor C384FA-M
English - 9