Mounting And Removing The Monitor Base; Mounting/Removing Lower Section Of Monitor Base; Removing Entire Monitor Base - Fujitsu Siemens Computers SCENICVIEW P17-1A Operating Manual

Colour Monitor
SCENICVIEW P17-1A

Mounting and removing the monitor base

The monitor surface is susceptible to scratching! Therefore, lay the monitor on a soft
!
surface when mounting or removing the monitor base.

Mounting/removing lower section of monitor base

When delivered the lower section of the monitor base is removed. If you do not want to use a
swivelling arm or a wall mounting, you must mount the lower section of the monitor base.

Removing entire monitor base

Before you can use a swivel arm or a wall bracket, you must remove the entire monitor base:
!
The monitor surface is susceptible to scratching!
► Switch off the monitor and pull the power plug out of the power socket.
8 - English
Mounting lower section of monitor base
► Lay the monitor on its face on a soft
surface.
► Push the lower section of the monitor base
in the upper section until it engages.
Removing lower section of monitor base
If you want to pack the monitor, you must
remove the lower section of the monitor base.
► Lay the monitor on its face on a soft
surface.
1
► Press on the release button (1) and pull off
the lower section.
A26361-K960-Z101-1-5E19