Table of Contents
Advertisement
For Wireless Network Users
Reset the network settings to factory default
To restore all network settings of the internal Scan server to factory default, please follow the steps below.
a
Make sure the machine is not operating, then disconnect all the cables from the machine (except the power
cord).
b
Press
.
c
Press Network.
d
Swipe up or down, or press a or b to display Network Reset, and then press Network Reset.
e
Press Yes.
f
Hold down Yes for 2 seconds to confirm.
g
The machine will restart, re-connect the cables once this is complete.
Entering Text for Wireless Settings
Press
to cycle between lower case and upper case.
Press
to cycle between letters, numbers and special characters. (The characters available may differ
depending on your country.)
To move the cursor to the left or right, press d or c.
Inserting spaces
To enter a space, press Space button.
Making corrections
If you entered a character incorrectly and want to change it, move the cursor to the incorrect character. Press
and re-enter the correct character. You can also back up and insert a character.
35
Advertisement
Table of Contents
