Nokia E7-00 Service Manual page 33

49) Place the CONNECTOR LOCK PLATE to its place.
Press the CONNECTOR LOCK PLATE with the SS-93 to
attach the two clips holding it.
51) Remove the camera window protective film from
the inner side of the BACK COVER.
53) Then press from the opposite side to lock the
BACK COVER to the BASE CHASSIS ASSEMBLY.
33
50) Close the device and insert the BATTERY to its
place.
52) Insert the shown side of the BACK COVER into
BASE CHASSIS ASSEMBLY.
54) Tighten the four TORX + size 4 screws to the
torque of 14 Ncm in the order shown.
Confidential | Copyright © 2010 Nokia | All rights reserved
Nokia E7-00
RM-626
Service Manual Level 1&2
Version 1.0