7) Carefully bend the BLACK COAX CABLE to its place as
shown. Make sure that the metal shell of the cable is
placed in the shown place.
9) Carefully bend the WHITE COAX CABLE to its place
as shown. Make also sure that the metal shell of the
WHITE COAX CABLE is in the shown place.
11) Tighten the Phillips size 00 screw to the torque
of 10 Ncm.
26
8) To connect the WHITE COAX CABLE, use the same
procedure as with the BLACK COAX CABLE.
10) Place the WASHER to its place with the tweezers.
12) Push the CABLE COVER to its place. Make sure that
cables are inside the CABLE COVER.
Confidential | Copyright © 2010 Nokia | All rights reserved
Nokia E7-00
RM-626
Service Manual Level 1&2
Version 1.0