INSTALLATION OF STAND
n
CAUTION
The monitor is heavy. Two person handling is recommended.
n
Install the stand on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
n
Do not give a strong impact to the monitor. It may cause damage.
n
Unplug the monitor before installation to avoid electric shock or damage.
Install the Stand as shown in the illustration.
Tighten the Screw to fasten the Stand.
ProLite L400W-B1X
ProLite L320W-B
5
BEFORE YOU OPERATE THE MONITOR
Screw × 4
Screw × 4
Stand
Stand