Connecting Your Monitor - Iiyama Prolite L400W User Manual

CONNECTING YOUR MONITOR

A Ensure that both the computer and the monitor are switched off.
B Connect the computer to the monitor with the signal cable. (See page 27 for CONNECTOR PIN
ASSIGNMENT.)
C Connect the RS-232C cable to the computer while using the RS-232C control feature. (See page
27 for CONNECTOR PIN ASSIGNMENT.)
D Connect the Power Cable to the monitor first and then to the power supply.
n The signal cables used for connecting the computer and monitor may vary with the type
NOTE
of computer used. An incorrect connection may cause serious damage to both the
monitor and the computer.
n For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama office for a suitable adaptor.
n Make sure you tighten the finger screws at each end of the signal cable.
[Example of Connection]
Computer
RS-232C Cable
(Accessory)
D-SUB Signal Cable
(Accessory)
S-Video Cable(Not included)
DVI-D Signal Cable
(Accessory)
Video Adapter
OVA1-2
Power Cable(Accessory)
(Optional)
Video Cable(Optional)
Video equipment
BEFORE YOU OPERATE THE MONITOR 8