Features; How To Connect - Schumacher Electric PI-750 Owner's Manual

 Incorrect operation of your inverter may result in damage
and personal injury. electrical current on a 110-volt circuit
can be very dangerous.
Your inverter features include:
A. oN/oFF Rocker Switch
B. leD Indicator light. (Green = Power oN, Red =
overload)
C. Two Standard electrical 110V AC outlets
D. 12-Volt Power Cord
e. High-Speed Cooling Fan
F. 2 50-Amp Fuses
How To Connect your PI-750 Inverter
Make sure the oN/oFF rocker switch is in the oFF (0)
position. Push the 12-volt power plug firmly into the
outlet. Switch the inverter rocker switch to the oN (I)
position. The leD indicator light should glow GReeN
verifying the inverter is receiving power. Turn the inverter
rocker switch to the oFF (0) position. (The GReeN leD
power indicator light may flash briefly and/or the internal
speaker may make a brief "beep." This is normal). Make
sure that the appliance to be operated is turned oFF.
Plug the appliance into one of the two AC outlets. Turn
the inverter rocker switch to the oN (I) position. Turn the
appliance on.
Attention: The internal speaker may also make a brief
"beep" when the inverter is being connected to or discon-
nected from the 12-volt power source.
You can use an extension cord from the inverter to the
appliance without significantly decreasing the power being
- 3 -