Schumacher Electric PID-760 Owner's Manual
  1. Manuals
  2. Brands
  3. Schumacher Electric Manuals
  4. Inverter
  5. PID-760
  6. Owner's manual
Schumacher Electric PID-760 Owner's Manual

Schumacher Electric PID-760 Owner's Manual

Power inverter
Hide thumbs Also See for PID-760:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
OWNER'S MANUAL
Power Inverter PID-760
Converts DC Battery Power to
Includes Clamp Adapter with Cables
CAUTION:
Read all Safety Rules and Operating Instructions,
and follow them with each use of this product.
Schumacher Electric Corporation
Mount Prospect, IL 60056 U.S.A.
Send Warranty Product Repairs to:
Customer Service Returns
P.O. Box 280, 1025 E. Thompson
Hoopeston, IL 60942-0280
Questions? Call Customer Service: 1-800-621-5485
AC Household Power
00-99-000668/0806

Advertisement

Table of Contents
loading

Related Manuals for Schumacher Electric PID-760

Summary of Contents for Schumacher Electric PID-760

  • Page 1 OWNER’S MANUAL Power Inverter PID-760 Converts DC Battery Power to AC Household Power Includes Clamp Adapter with Cables CAUTION: Read all Safety Rules and Operating Instructions, and follow them with each use of this product. Schumacher Electric Corporation Mount Prospect, IL 60056 U.S.A.

  • Page 2: Important Safety Instructions

    IMPORTANT SAfETy INSTRUCTIONS SAvE THESE INSTRUCTIONS Before using your PID-760, read and understand this Owner’s Manual. • Keep the inverter well ventilated in order to properly dis- perse heat generated while it is in use. Make sure there are several inches of clearance around the top and sides and do not block the slots of the inverter.
  • Page 3 BEfORE USING PID-760 POWER INvERTER It is important to know the continuous wattage of the device you plan to use with the inverter. The PID-760 must be used with devices drawing 760 watts or less. If the wattage is not marked on the device, an estimate can be made by multiply- ing the AC input current (Amps) by the AC voltage (110V).
  • Page 4 OPERATING INSTRUCTIONS Connecting to a 12v Battery: The PID-760 battery clamps allow quick hook-up to a 12V battery. Make sure the PID-760 and the devices are turned off. 1. Unscrew the positive (red) and negative (black) plastic connector knobs from the back of the inverter.

  • Page 5: Power Source

    To change the display, press the button marked PRESS TO CHANGE DISPLAY. 7. To disconnect the PID-760, reverse the above steps. NOTE: If there is a short circuit or power surge in the device, SC will display and the alarm will sound. To turn off the alarm, press and hold the button marked PRESS AND HOLD FOR ON / OFF.

  • Page 6: Usage Examples

    75 watts Small Appliances 525 watts LED DISPLAy The LED readouts identify the current status of the PID-760. vOLTAGE IN: Voltage of vehicle’s battery or Portable Power jump starter/DC power source. vOLTAGE OUT: Voltage supplied to device through AC receptacle.
  • Page 7 – Inverter is not functional. See warranty and call Customer Service 800-621-5485 (Hours: 7 a.m. – 4:0 p.m. CST). Hi b – Vehicle’s battery voltage is more than 15.5 volts. Inverter will automatically restart after the voltage drops below 15.5 volts. Hi p –...

  • Page 8: Troubleshooting

    TROUBLESHOOTING PROBLEM: Alarm is On Reason/Solution Display shows . Device has a short circuit or demands too much surge power. Cycle inverter power OFF and ON. If problem persists, use a larger inverter or a smaller device. Remove defective device. See warranty and call Customer Service 800-621-5485 (Hours: 7 a.m.
  • Page 9 Inverter will automatically reset after cooling. PROBLEM: Inverter Does Not Turn On Reason/Solution Poor contact at terminals. Unplug and reinsert PID-760. fuse is blown. A blown fuse is usually caused by reverse polarity or a short circuit within the inverter. To replace, contact...

  • Page 10: Specifications

    SPECIfICATIONS Maximum Continuous Power ......760 Watts Surge Capacity (Output Wattage) ..... 1520 Watts No Load Current Draw ........<0.6 Amps Wave Form .......... Modified Sine Wave Input Voltage Range ......... 10.5 – 15.5V DC Low Battery Alarm ........10.7V – 11.V DC Output Voltage ..........110V –...

  • Page 11: Limited Warranty

    Your inverter should be properly packed to avoid damage in transit since we will not be responsible for any such damage. In no event shall Schumacher Electric Corporation be liable for consequential damages. Some states do not allow limitations on...
  • Page 12 NOTES...

Table of Contents