Hard Disk Data Erase Utility - Panasonic CF-19 Series Reference Manual

Hard Disk Data Erase Utility

When disposing the computer or transferring the ownership, erase all hard disk data in order to avoid data leakage. Even if
you erase the data or initialize the hard disk using normal Windows commands, the data can be read with some special soft-
ware. Use the hard disk data erase utility to erase the data completely.
Note that transferring of the ownership without uninstalling the commercial software will be a violation of the software's
license agreement.
The hard disk data erase utility erases data using an overwriting method, but there is a possibility that due to malfunctions or
other operational errors, data may not be completely erased. There are also specialized devices that may be able to read
data that has been erased using this method. If you need to erase highly confidential data, we recommend that you contact
a company that specializes in this process. Panasonic Corporation will bear no responsibility for losses or damages suffered
as a result of the use of this utility.
NOTE
This utility cannot erase data for specific partitions.
Preparation
Prepare the following items:
• The Product Recovery DVD-ROM for Windows XP (included)
• Panasonic CD/DVD drive (optional) (refer to recent catalogs and other sources for information about the prod-
ucts available)
Remove all peripherals (except for the CD/DVD drive).
Connect the AC adaptor and do not remove it until hard disk data erase is complete.
1
Turn off the computer and connect the CD/DVD drive to the USB port.
2
Turn on the computer, and press
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
3
Press .
F9
At the confirmation message, select [Yes] and press Enter.
4
Press .
F10
At the confirmation message, select [Yes] and press Enter.
The computer will restart.
5
Press or
F2 Del
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
6
Set the Product Recovery DVD-ROM for Windows XP into the CD/DVD drive.
F2
while [Panasonic] boot screen is displayed.
or while [Panasonic] boot screen is displayed.
Del
101