Panasonic CF-19 Series Reference Manual page 110

Troubleshooting (Advanced)
Connecting Peripherals
You do not know the address map for
IRQ, I/O port address, etc.
The device connected to the serial port
does not work.
The Serial Port B of the port replicator
or the car mounter does not work.
Cannot print.
To check the current address map, click [start] - [Control Panel] - [Performance
and Maintenance] - [System] - [Hardware] - [Device Manager] - [View] -
[Resources by type].
Check the connection.
The device driver may not work. Refer to the instruction manual of the device.
Do not connect 2 mouse devices simultaneously.
Set [Touch Pad] to [Disabled] in the [Main] menu of the Setup Utility (
87).
Set [Serial Port A] or [Serial Port B] to [Auto] in the submenu of [Serial Port
Settings] in the [Advanced] menu of the Setup Utility (
The I/O and IRQ you can use vary depending on the device. If the setting does
not work, try other settings in the Setup Utility.
Set [Serial Port B] to [Auto] in the submenu of [Serial Port Settings] in the
[Advanced] menu of the Setup Utility (
Check the printer connection.
Turn on the printer.
The printer is not online.
No paper is in the printer tray or there is a paper jam.
Turn on the printer and connect it to the computer, and then restart the
computer.
Check the network connection if the printer is connected via network.
110
page 89).
page 89).
page