Panasonic CF-19 Series Reference Manual page 42

Port Replicator / Car Mounter
6
Click [PS/2 Compatible Mouse] and click [Next].
7
At the confirmation message, click [Yes].
8
Click [Finish] and click [Close].
9
When the message requests restart of Windows, click [Yes].
The computer will restart.
NOTE
If you cannot use the functions of the external mouse and trackball even after the steps above, perform the steps
below.
Turn off the computer and connect to the port replicator or to the car mounter.
A
Connect the external mouse or trackball to the port replicator or to the car mounter.
B
Turn on the computer and start up the Setup Utility (
C
Select the [Main] menu, and set [Touch Pad] to [Disabled].
D
Press F10, and then select [Yes] and press Enter.
E
Log on to Windows as an administrator.
F
When [Completing the Found New Hardware Wizard] appears, click [Finish].
G
When the message requests restart of Windows, click [Yes].
H
The computer will restart.
Install the necessary driver following the operating instructions of the connected device.
I
page 85).
42