Hard Disk Data Erase Utility - Panasonic CF-T5 series Operating Instructions Manual

Hard Disk Data Erase Utility

When disposing the computer or transferring the ownership, erase all hard disk data in order to avoid data leakage.
Even if you erase the data or initialize the hard disk using normal Windows commands, the data can be read with some
special software. Use the hard disk data erase utility to erase the data completely.
Note that transferring of the ownership without uninstalling the commercial software will be a violation of the software's
license agreement.
The hard disk data erase utility erases data using an overwriting method, but there is a possibility that due to malfunc-
tions or other operational errors, data may not be completely erased. There are also specialized devices that may be
able to read data that has been erased using this method. If you need to erase highly confidential data, we recom-
mend that you contact a company that specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no
responsibility for losses or damages suffered as a result of the use of this utility.
CAUTION
When the hard disk contains the Recover Pro backup data, the Recover Pro backup area is lost as well.
<For MUI OS model>
To input numbers, press the NumLock key and input in the Ten-key mode.
For German keyboard, press Z when you need to press Y.
NOTE
This utility cannot erase data for specific partitions. The entire hard disk data will be erased.
Preparation
Prepare the Product Recovery DVD-ROM (included).
Prepare the Panasonic CD/DVD drive (optional): CF-VDRRT1M, CF-VDRRT2W, CF-VDRRT3W.
Remove all peripherals (except for the CD/DVD drive).
Connect the AC adaptor and do not remove it until hard disk data erase is complete.
1 Turn off the computer and connect the CD/DVD drive to the computer.
2 Turn on the computer, and press
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
3 Press .
F9
At the confirmation message, select [Yes] and press Enter.
4 Select the [Boot] menu, then select [USB CDD] and press
top of [Boot priority order].
5 Set the Product Recovery DVD-ROM into the CD/DVD drive.
6 Press .
F10
At the confirmation message, select [Yes] and press Enter.
The computer will restart.
If [Enter Password] is displayed during the following procedures, input the Supervisor Password or the User
Password.
7 Press to execute [2. [Erase HDD]].
2
To cancel this operation, press 0.
8 At the confirmation message, press
9 When [<<< Start menu >>>] is displayed, press
The approximate time required for erasing data will be displayed.
10 Press .
Space
At the confirmation message, press Enter.
The hard disk erase process starts. When the operation is completed, the "Hard disk data has been deleted."
message will appear. If a problem has occurred during the operation, an error message will appear.
To cancel partway, press Ctrl + C. The data erasure will be up to that point.
11 Remove the Product Recovery DVD-ROM, and then press any key to turn off the com-
puter after the message "Hard disk data has been deleted." is displayed.
while [Panasonic] boot screen is displayed.
F2
.
Y
.
Enter
until [USB CDD] is at the
F6
23