Computer - Polar Electro Equine RC3 GPS Getting Started Manual

3. CHARGE THE TRAINING COMPUTER
The RC3 GPS has an internal, rechargable battery.
Charge the RC3 GPS via a USB connection on your
computer by using the USB cable that comes with the
product set. If you want to plug the USB connector to
a wall outlet, use a USB power adapter (not included
in the product set).
1. Plug the micro USB connector into the USB port in
the RC3 GPS.
2. Plug the USB connector into a computer USB port.
It is recommended not to use USB hubs because a
USB hub may not supply enough power for the RC3
GPS.
3. The charging animation appears on the display.
Fully charging the battery takes up to 1,5 hours.
When the RC3 GPS is fully charged, Charging
4.
complete is displayed. Disconnect the cable.
Use a USB 1.1/2.0 compliant cable included in the set package. The charging time may be
prolonged if you charge from a USB hub.
6 ENGLISH