Do not move your arm during the search. Keep still!
Stand still and hold the position until the training computer has found the satellite
signals (an alarm sounds and a check mark appears on the arm of the figure once the
signal is found). In good conditions, finding the satellite signals for the first time
typically takes 30-60 seconds.
3.
Select the sport profile you want to use by browsing with
UP/DOWN.
If you have activated the GPS function in this sport profile, the
RC3 GPS will automatically start searching for the signal. You
can set the function on in MENU > Settings > Sport profiles
> Running/Cycling/Other Sport .
4.
To catch the GPS satellite signals, go outdoors and away from
tall buildings and trees.
Wear the training computer with the face upwards on your wrist.
Keep the training computer in a horizontal position in front of
you and away from your chest. Keep your arm stationary and
raised above the level of your chest during the search.
ENGLISH
17