Wear The Soft Strap - Polar Electro Equine RC3 GPS Getting Started Manual

6. WEAR THE SOFT STRAP

1. Moisten the electrode area of the strap.
2. Attach the heart rate sensor to the strap.
3. Tie the strap around your chest, just below the chest
muscles, and attach the hook to the other end of the
strap.
4. Adjust the strap length to fit tightly but comfortably.
Check that the moist electrode areas are firmly against
your skin and that the Polar logo of the heart rate
sensor is in a central and upright position.
Detach the heart rate sensor from the strap and rinse the
strap under running water after every use. Sweat and
moisture may keep the electrodes wet and the heart rate
sensor activated. This will reduce the heart rate sensor
battery life. For more detailed washing instructions, see
Important Information (page 21).
ENGLISH 15