8.10 Top Cover Printed ASSY (LED model)
(1) Remove the two bind B M4x12 Taptite screws from the Top cover printed ASSY.
(2) Release all Hooks of the Top cover printed ASSY and lift up the front side of the Top
cover printed ASSY.
(3) Remove the Top cover printed ASSY.
(4) Remove the Support flap 2.
Hook
Hook
Note:
There are procedures for disassembling Frame L after this procedure.
(8.33 FRAME L
Support flap 2
3
2
Hook
Fig. 5-38
ASSY)
Hook
Taptite, bind B M4x12
5-38
Top cover printed ASSY
Hook
<Front side>
Confidential