Inner Chute/Pinch Roller Holder - Brother HL-5340D Service Manual

8.10.3 Inner Chute/Pinch Roller Holder

(1) Remove the six bind B M4x12 Taptite screws, and then remove the Inner chute.
(2) Release all Hooks of the Inner chute and lift up the front side of the Inner chute.
(3) Pull out the Inner chute to the front side.
Taptite, bind B M4x12
Top cover printed ASSY
Assembling Note:
• When assembling the Inner chute, secure the screws according to the order of alphabet
described in the figure above.
(4) Turn the Inner chute upside down.
(5) Remove the Pinch roller holder from the Inner chute.
Pinch roller holder
Assembling Note:
• When assembling the Pinch roller holder, be sure that its direction is correct as shown in
the figure above.
b
c
d
Hooks
Fig. 5-42
Pinch roller holder
Fig. 5-43
a
Inner chute
e
Taptite, bind B M4x12
5-41
Taptite, bind B M4x12
f
Hooks
nner chute
Confidential