Battery Chargers - 3M C860 Operating Instructions Manual

Controls and Indicators

Battery Chargers

1 Charging Slots
2 Conditioning
and/or
Charging Slot
3 Charging Status
Indicators
4 Conditioning
Button
5 Conditioning
Status Indicator
6 Power Supply Jack
7 Power Supply
6
The 3-slot and 6-slot battery charger controls are shown below.
The charging slots hold batteries during the recharging cycle.
This dual-function slot holds a battery during conditioning and recharging
cycles. This slot functions as a conditioning slot when the conditioning button is
pressed.
The charging status indicators light RED, GREEN, or ORANGE to indicate
charging status:
RED indicates the battery is being charged.
GREEN to indicate the battery is fully charged.
ORANGE to indicate the battery is defective.
Press the conditioning button to condition a battery that is inserted in the
conditioning/charging slot. The button must be pressed within 2 seconds of
inserting the battery.
The conditioning status indicator lights YELLOW to indicate the battery in the
conditioning slot is being conditioned.
This jack accepts the plug from the power supply cord.
The power supply provides power to the battery charger.
Figure 6.
Model C860
 3M 2003
January