Assemble Accessories - Porter-Cable CMB15-B3 Instruction Manual

CONTENTS OF CARTON
Air Compressor (1)
Air Hose (1)
Female Tire Chuck (1)
Inflator Accessory Kit (1)
TOOLS REqUIRED FOR ASSEMBLY
1 - 9/16 inch open end wrench
1 - adjustable wrench
UNPACkING
Remove unit from carton and discard all packaging.
NOTE: Save all parts bags.
ASSEMBLE HOSE
Assemble hose
IMPORTANT: The hex fitting on the
air outlet MUST be held in place with
a wrench (Fig. 1) when tightening hose
onto air outlet.

ASSEMBLE ACCESSORIES

(FIG. 2)
To reduce the risk of
injury, turn unit off and disconnect it
from power source before installing
and removing accessories, before
adjusting or when making repairs.
An accidental start-up can cause
injury.
Choose the accessory
NOTE: Apply thread seal tape to
threads of exposed fittings.
Assemble Female Tire Chuck
Assemble female tire chuck to hose
and tighten securely with wrenches.
Assemble Other Accessories
1. Attach the hose adapter to hose.
2. Choose the needed accessory.
Attach the tapered nozzles, nee-
dle or high flow inflator/deflator
adapter body to the hose adapter.
ASSEMBLY
to air outlet.
needed.
9 - ENG
Female
2
Tire
Chuck
Tapered
Nozzles
Inflation
Hose
Needle
Adapter
igh Flow Inflator/
H
deflator Adapter
Body with nozzles
1
Hose
End