Operating Instructions - Electrolux EHI845BA User Manual

OPERATING INSTRUCTIONS

On and off
Touch for 1 second to activate or deactivate the
appliance.
automatic switch off
The function deactivates the appliance automatically if:
• All cooking zones are deactivated (
• Y ou do not set the heat setting after you activate the
appliance.
• Y ou spill something or put something on the control
panel for more than 10 seconds, (a pan, a cloth, etc).
An acoustic signal sounds after some time and the
appliance deactivates. Remove the object or clean the
control panel.
• T he appliance becomes too hot (e.g. when a
saucepan boils dry). Before you use the appliance
again, wait for the cooking zone to cool down.
• Y ou use incorrect cookware. The symbol
and the cooking zone deactivates automatically after 2
minutes.
• Y ou do not deactivate a cooking zone or change the
heat setting. After some time
appliance deactivates. See the table below.
automatic switch off times
Heat setting
Stops after 6 hours
The heat setting
Touch the control bar at the heat setting. Change to the
left or the right, if it is necessary. Do not release before you
have a correct heat setting. The display shows the heat
setting.
Connect function
ImPOrTanT!
Use the Connect Function with the
Infinite Plancha accessory .
1)
The Connect Function connects two right side cooking
zones under the accessory and they operate as one. First
set the heat setting for one of the cooking zones.
To activate the Connect Function, touch
change the heat setting, touch one of the control sensors.
To deactivate the Connect Function, touch
cooking zones operate independently.
The Infinite Plancha accessory is not supplied with the appliance. For more information, please contact your local supplier.
1)
).
comes on
comes on and the
5 hours
. To set or
. The
4 hours 1.5 hours
7